ep91_glanza

oh good because that would be a t**t with the starter motor and that cheers

is the flywheel actually bigger or is it just the grommits on the side that are different??

will i need some different bolts aswell cause someone said they wer longer bolts r somthing

how much u want for it

can anyone please tell me whats wrong.. i bought a clutch and was for an ep91 and when i came to fit it the holes didnt line up to the flywheel,the clutch is too big? my car was converted from a auto to a manual before i bought it does that have anything to do with the sizes??cheers karl

Does anyone know if the gearbox housing out of a normal starlet is the same as a glanza one???

Ok cool they look canny akward like. Ive got to swap the casing over because my clutch went and the bit where the bearing slides up and down has broke into pieces(nightmare) how come one of the most important bit of the car is made out of very soft metal aarrghh cheers mate

Hi has anyone took the casing off a gearbox before ??ive took the 10 or 11 bolts holding it on the outside off and the 3 on the inside off but still seems to be holding on.....all the liquid gasket is off and its apart but wont come further than 10 mm off the gearbox. Cheers karl

can any one guide me please? i want a piggyback ecu and just wanting others opinions on what to go for and where to find one and how much?? put up some links that would be a very good help cheers

I seen you parked up in the car park looked very nice was a starlet sr in white

Cool i will take a look cheers

Or would an emanage be just as good?

How much would a brand new after marketbecu cost and where would i look cheers

Cool where abouts should i be looking ? Any links?

Cool where abouts should i be looking ? Any links?

Hi all just a little advice please if anyone could help much appriciated, recently ive had my car set up on a rolling road but i only have a fuel cut defender and rrfpr and safc 2 and it does the job but i want some more power. My question was if i spend some money would an emanage give me some more power? Im using a tongs hybrid gt spec turbo cheers karl

Cool i was down on bank holiday and was quite good even though it was the american shit but still a good day

Look for york raceway in google some were

Hi all just to ask if anyone is goin or fancys goin to york raceway on sunday the 19th of september (couple of weeks) because its apparently a new event there and lots of little hot hatches from different countrys go so should be a good day,a few mates are goin down.Should be a good laugh cheers karl

if i turn the boost up a little it hits fuel cut.if i adjust the fcd will it mess up my fuelling??cheers

hello everyone much help appriciated,im just wondering on what mods would make me see more power out of a ct9 hybrid? my mods are- ct9 hybrid toytuning actuator fmic relocated filter air con removal trd leads ngk irridium plugs turbo smart dumpvalve full custom exhaust race tech cat zisco mani hdi boost controller low boost- 0.6 high -1.0 jam fcd sard rrfpr super air flow convertor the car has also been setup on a RR at pd tuning in boldon and made 174hp and 143hp at wheels and was at 0.6 boost,the boost controller was on low boost when it got setup and i forgot to change it to high so i nev

Drop me a pm when you know what day nd price your having RR cheers

Haha scott ya mad!!

Were abouts is that??

Same with me,ive been driving mine for ages when the fueling wasnt set up and was running lean on idle and rich in the higher rev range but now is setup nice and safe saving lots of petrol and running somewer round 200 bhp at 1.0bar