ep91_glanza

I really need to update my thread as ive got a few updates but got no god damn camera it bust on me!!

Has anyone tried the dyno at santa pod??Im just wondering if they tune aswell

Rite....this will probbs sound stupid but if i unplug the connector for the expansion chamber it goes???? Can anyone tell me y

Same with mine its at the back of the engine bay and can only hear it inside the car and ive checked exhaust and thats fine!!!

And ive got a zisco mani and brand new custom exhaust

It does sound like the gearbox mate ,just appeared this morning.

Nah mate its still there but only does it wen i slightly put revs on

Hi i started my car this morning and noticed a weird clicking noise when i slightly put revs on when idling...... I know i have a dodgy release bearing but had that noise for ages.can anyone have a good guess cheers for help

im goin aswell but my mate is a student at leeds uni so he said i could travel down from newcastle and stay on the friday nite and then we will travel to santa pod on thesaturday morning which is good cause its probably halfway. also handy because im picking up a rrfpr from sheffield so works out canny!!!!

Cheers for the advice mate

Do you reckon i should take the fcd off and run .8 ??

Anti- clockwise i meant sorry

I know i can adjust the fcd. Its turned all the way clockwise???????

I recently fitted a jam fcd via the map sensor and yeah it does work but when driving about 20-30 mph it feels like the car is nudging but if i put my foot a little further its ok....the car is fine if i take the fcd off can any one please give me advice. Cheers help much appriciated spec: ct9 gt spec hks filter trd leads ngk iridium plugs zisco mildsteel mani race tech decat stainless cat-back toytuning actuator set about .6 fmic hdi boost controller set 1.0 bar apexi safc 2 greddy boost gauge

Just another big thanx to enzo for my four gaskets!! Ive ordered many parts off traders but i can honestly say none of them are as quick and reliable as enzo. A very fast delivery once again thanx. Karl

Can anyone recommend an exhaust as mine has gone capute!!! I have a budget of 400 smackeroonys. Does anyone rate the buddyclub spec II or the blitz nur spec

Sunderland 1. YoungStig EP91 N/A 2. JonnyGt EP91 SR 3. John ^ Dad Ep91 N/A 4. Yazzii (my g/f EP82) 5. Iam a leg end EP82 6. chrissy cee ep91 Glanza Hartleepool 1. Usher EP8 2. Nismo Micra EP82 3SGT 3. JonnySi EP91 4. Dean-Dak EP91 (technically not hartlepool but close enough) Newcastle 1. scottyglanza 2. jkgt ep82 3. toodles 4. Ep91_glanza(karlo)<<< Middlesbough Newton Aycliffe/Darlington Area 1. Dale10ellis10 EP91 Glanza Hull/East Yorkshire 1. Laura_ep91 (ep91) 2. Blackrocket (Glanza) 3. SR Phill (EP91 SR) Facebook Phill Fordham Also add the group mod-info

Sunderland 1. YoungStig EP91 N/A 2. JonnyGt EP91 SR 3. John ^ Dad Ep91 N/A 4. Yazzii (my g/f EP82) 5. Iam a leg end EP82 6. chrissy cee ep91 Glanza Hartleepool 1. Usher EP8 2. Nismo Micra EP82 3SGT 3. JonnySi EP91 4. Dean-Dak EP91 (technically not hartlepool but close enough) Newcastle 1. scottyglanza 2. jkgt ep82 3. toodles 4.ep91_glanza(karlo)<<< Middlesbough Newton Aycliffe/Darlington Area 1. Dale10ellis10 EP91 Glanza Hull/East Yorkshire 1. Laura_ep91 (ep91) 2. Blackrocket (Glanza) 3. SR Phill (EP91 SR) Facebook Phill Fordham Also add the group mod-info

Ive just looked at the wires goin into the ECU and the blue wire on the diagram is green on mine but hasnt been cut

i was planning on running 1.1bar with my gt spec hybrid

You only get one........WHAT!!!!

Anyone got any pics or diagrams of the safc2 wired with a fcd cheers

Anyone got any pics or diagrams of the safc2 wired with a fcd cheers

I always had the boost turned down when i didnt have a fcd but now i fitted one i turned boost up and hits fuel cut,il check wiring and probs get it checked out but thanks matey.