nordonian

recently pipex wer bought over by tiscali, and since then my internet has suffered unbeleavably. The maxumum my line can handle has dropped from 5 meg, to 2 meg. can anyone on the forum. Who uses pipex please do a bt line check, and see if the max has dropped. http://www.productsandservices.bt.com/cons...o?topicId=16541

can anyone confirm that the heater matrix from a glanza, is the same as that found in a 1998 starlet sr, ep91

i love the difference i gained from fitting the corolla mani. Car pulls far far better through the revs, and bounces off the limiter with a much nicer note.

my windows gave a bit of bother a while back. Turned out the glass had come away from the arm holding it in place. was just a case of removing the plastic shield on both doors and tightening up all the bolts in the glass and arm for the glass hope this helps mate

cheers for the help guys ive managed to find a company who are going to recoil it for me, Once the car goes to the mechanic to get the engine dropped in, hes gonna strip out the matrix and its being collected.

Finally getting around to sorting out the problems with the engine and im dropping a 35k engine in next weekend. What parts should i strip off my old engine before i bring it to the scrappies. I know about the head gasket but what other easy removable parts would be suitable to sell on and try recoup some of my spent pennies. Anyone on here need anything from it?

thats about on the money mate I bought a set for 150 from a guy on ebay, but he did a runner with my money. They were in pretty decent nick, and a few sets have sold on here for about 180-200 so its bang on the money id say mate.

noticed a small amount of water on the passenger footwell, and water dripping from behind the glove box. I presume the problem is the Heater? How much roughly am i looking at to replace it or is there any temporary fixes i can do for 2-3 weeks as i have no money for a while. it drips along the black plastic before finally dripping down from the gold nut in the middle of the pic

http://www.anagramgenius.com/server.html what does your name(s) end up being?? 'david norden' anagrams to 'Void and nerd.' 'nordonian' anagrams to 'On drain on.' 'david martin norden' anagrams to 'Driver and dominant.' 'manchester united' anagrams to 'The nut's named Eric.' (the legendary eric cantona lives on)

the wee rubber covers for over the top of the brake pipe for when ure bleeding the brakes. i had one missing and the rubber cracked on 2 of them removing them so they cant go back on. Ive tried motorfactors who told me they would never stock such a part

I have the k&n panel filter in mine and its still good as new after at least 50k

too late, im already offended.

thats it off and all cheers guys theres about an inch of dirt behind it. Bring ont he new stickers

I removed the badge on the bonnet a while ago, and had to stick it back on after realising there was 2 holes behind it. Can anyone tell me if the round toyota badge on the bootlid is the same or if its just stuck on with rubbers. Im replacing all stickers and badges with different designs and dont wanna have the round toyota badge at the top

Does anyone know if either of these two i found on ebay fit? Diameter - 63mm Depth including lugs - 25mm http://cgi.ebay.co.uk/TOYOTA-chrome-alloy-...VQQcmdZViewItem Diameter - 57mm Depth including lugs - 20mm http://cgi.ebay.co.uk/TOYOTA-chrome-alloy-...VQQcmdZViewItem