Scott-EP

;)

Last person that lent against my car new about it!! I hate it when people do it, i asked him nicely to get of the car and he just started laughing, asked him again and just said seriously get of the car it isn't yours so jog on and he squared up to me so i smacked him one right in nose, grabbed him and push him into a brick wall and he ran off!! I hate it so much I was quite impressed with myself actually as i never normally hit anybody first but i new what was coming if i didn't so for him i made an exception lol

Thats all sorted now ;) cheer's everyone

If you do it for £10 including P&P I'll have it ?? ;)

No thats cool i understand exactly what you mean mate haha I dunno what to use to cover the hole's on the Standard bov though Hmm need to think lol May pop down the local Health center and Get 2 Johnny's a Ribbed one and a Chocolate one and put them over the Hole's! haha

How much are the blanking plugs usually ?

Thats ok mate! Cheer's i will PM Enzo now, Can i just ask what do you actually block of to get the Chatter, Do you put that blanking plug on the Induction pipe, and block the pipe of that you put onto the BOV ?? Cheers

Cool mate cheer's!!! I have just taken my Greddy one apart as i was wondering that also, and the bottom breather just goes up to a little recess that runs right around the bottom of the 2 springs inside so im pretty sure it can just be left with no pipe going to it ;) Surely the standard recirculating valve shouldn't drag any stuff in as if it's a valve it will only let air flow out not in ??

I'd would keep a close eye on the car at night mate! And look out side whenever a car drive's past your house if you live down a quiet road! I'm trieing to get my dad to sell his car's so i can stick mine right up the back of our drive! as i really don't like it sitting out on the road ;) Especially considering my mum and dads car have been broken into recently but i have a killer knife that will be going through there heart if they touch it, And trust me it is a savage knife!! And even though it is only a Display knife it's Razor sharp ;) .........

Haha call yourself a moderator lol thanks for getting the picture's up quickly anyway ;) I've just Pm'd Turbodave so hopefully he will get back to me Thanks once again

Hmm the thing is, Is that im trieing to install it onto the Standard Intercooler, Induction pipe's though, The thing im stuck on is were the Breather come's out of the rocker cover, the over end of that pipe there is what im guessing is the standard recirculation valve ?? Thats bolted down onto the Standard induction/Air box pipe, When i unbolt that and remove it im left with a Hole, I need to know how to Put the BOV onto/into that hole as i have no way of fastening it down onto the pipe if you understand me haha

Ok thank you ;)

Please upload a picture if you can i want to try and fit it tomorrow afternoon or sunday ;)

Hello, Here is a Hows to on removing the Air-con in the technical section mate ;) http://www.ukstarletclub.com/forums/index.php?showtopic=4486

^^^ ;)

My boss gave me a Greddy Type-s Bov, it's of his RS Turbo, How do i fit it to the Starlet, I know I'm going to have to adapt the pipe's for it but i don't know were all the Pipe's go, I'll have a go and see if i've got this right though... The bit Circled in Blue is just left open im guessing as that is the bit the Pressure get's released from ? The bit Circled in Red im guessing you can get one's that fit onto the Starlet and it slots into the little whole on the Induction pipe once you've removed the Re-circulation valve that is bolted to the induction pipe ? One of the bit's circled in Yellow you connect the Breather from the Inlet manifold to ?? But what goes into the other one ?? And also you need to put a Breather on the Rocker cover ??

Haha sounds good mate ;) My boss was surprised at how clean it is underneath there is no build up of road grime what so ever its still got original paint underneath and underseal it's cleaner then my old 06 plate swift was!! lol I also need to get some Tyre's now, Coilover's of Enzo next Tuesday ;) I took the ramp up to get underneath to see if i could find what Exhaust it had on it, I saw this (JASMA) Is this the make, I have heard that exhausts get this Welded to them in japan if the Exhaust passes there MOT test to say the Exhaust does not exceed there Noise Regulations ?? Is this true Also my boss decided to give me a little present, A Genuine Greddy Type S BOV But it's of his RS Turbo and have no idea how to install it i had a quick look and know were it goes but i don't know what pipe's go were :S Also he told me about the whole blocking the BOV off is bad for the turbo, He told me its a load of rubbish as the reason you get the sound is not because the air is pushing with force onto the turbo blade's as it doesn't, As when you lift of the Throttle the throttle body obviously close then all the air getting forced through by the turbo hits the throttle body thus causing a shock wave and sending the air backwards and as the turbo blade is still spinning it just chops through the air causing the sound, But all the force from the built up pressure get's released when it hits the Throttle body NOT the turbo blade's, He has never run a BOV on his RS and he runs about 1.7 Bar so i think i believe him also he is a fully qualified mechanic and has been for around 32 Years lol

Only had 2 job's in this morning at work, got them out by 12oclock, And then my boss let me get my car down the garage!! This is the list of things that i needed to do and i got them all done Tighten up both inner arch's (as they rattled on idle) Replace bulb behind heater control's Replace interior light bulb 2 New CV Joints and Gaiters (Payed for and supplied by garage i got car from) Re-MOT just to make sure the garage i got it from wasn't cheating me at all!! All is excellent Clean underneath car, Grease all brake and fuel pipes to prevent them from rusting Re underseal the Seals, Arches and Joins in the chassis Valet the inside of the car Remove those hideous parcel shelf speakers and all the wiring haha Test fit wheel's to make sure they fit ok And finally Change oil and oil filter even though it was done by the garage 2 weeks ago haha The total bill of all that works : £3.48 as all i had to pay for was the bulbs for the Heater control and i got 4 so have some spare's I'm quite happy with what i've achieved today so thought i had to post it up Hope everyone has had a good day

Example - Wont go quietly, Bit old now but still such a tune!

What area was the car sold in ??

Cheer's People and yes I'm getting some Toyo Proxes T1-R's

Well at long last i received my wheel's!! And with a 10% Discount i wouldn't mind having to wait 2weeks for everything i buy haha On there website they said the rim size was 15 x 6.5, But they say on the wheel's there 15 x 7 Wider is better Well happy but before they go onto the Car im going to get my Meister Coily's

Has that website i posted up on here not got them instock ?

I would say Toyo T1R's had them on my old car very good tyre's :surrender: And there cheap I can get 205/50/15's for £130 Fitted ;)

Well i got an Email today at last, They said the dispatched them this morning so i should have them tomorrow or Friday, But if i still want a cancel order to just refuse delivery and i will get a full refund, I replied, I'm completely disgusted with the Service POTN has given me, I will accept delivery if you Refund me 10% of the amount i payed incl Delivery if not i am going to Refuse delivery so you will lose out completely, They replied, We will refund you 10% as a way of Apology for the Delay and lack of communication on our Half, So hopefully they are not messing me around again, and they will actually turn up tomorrow or Friday and i will get refunded £44 which mean's i've payed just under £390 for the wheel's, Result! As i cannot find them anywhere for cheaper then this with delivery included :surrender: