chr15_7_t_

i dont know what ther called...when you take off your cams ther under the roller parts? 16 of them one for every valve..

checked it today with an edge and ther is the smalest of small gap lol...so just to be safe im geting it done..i got quoted £40 for a skim..i dont know wat they will charge for puting the new seals and that in though.

when i took the head out today i was told to take the caps on the top of the valves(sorry i dont know what you call them)... do you think i should leave them all in when it goes or am i best to take all the wee bits i can off apart from the valves?

its all geting droped off to the head shop on tuesday to get done...did you put your head in to get skimed?

that the cam seals your on about yeh? if it is i got alll new seals with the kit...even came with valve stem seals lol

oryt, thanks mate:)...that does make sense to do it as a pair.

any other sugestions on the subject?

when me and my mate were taking the head off my car we noticed that the end of the exhaust side cam has cracked and is now broken...

so i orderd another set of 2nd hand cams, now this is where i need the help?

do i need to do anything to the head or is it ok to just put the cam straight back in?and am i best just to change the cam that is broke or both?

help would be great

thats brilliant mate:)....thanks for the help

so they would go strate in and wouldnt change anything?

are the cams in the gtt ep82 the same as the ones in a glanza s?

im wondring as one of my cams broke whilst takin them off to get the head off so i need a new exhasut side cam..?if anyone has one outo a gtt id be interested?

does anyone no the size of the wastegate in mm? cheers

i already got a ported turbo mate:)..wat you askn for the actuator?

so bout 180bhp would be a good figure to aim for?

so runing it on 0.8bar of boost would only be considerd if i get sum management?

what do you think i could get outo it bhp wise with the list that i put up if i keept the boost at 0.65 i think it is?

what do you recomend is a safe number before i have to look an engine management?

just wondering what sort of numbers id be looking at if i done this..

i got a ported turbo

a front mounted filter

things to get..

hks actuator

front mount intercooler

stainles mani and decat

electronic boost controller

and a posible re-map

im looking to hopefuly get 200..im not wanting to go over 200 id rather keep it on the safe side....do you think its posible with that mods?

5-600..

thats what im woried bout if i have ...how much you rekon i would be for another head?

ther a reconditiond one on ebay thats done bout 3000 miles for £220 i think it was..that good?

im tihnking i myt need to buy another head for my engine now...not 100% shure yet wont no till it comes back from testing.

but what kinda prices should i be looking for?

the head thats in it the now has done bout 76k miles.

only slight diference i noticed apart from it using water obv was it ideling bout 5-6

its parked up in my garage now waitn for one o my mates to come take the head of for me

oryt...makes sens.

cheers mate:)

as im new to the jap sene and i dont no as much as id like to no bout my starlet yet but as much as i do no so far i love my car ...beats the old pug lol.

im wondering about the boot...i notice in sum ep82 ther isnt the middle bit between the lights and on others ther is(like mine). is this something you cn get a panel beater to do or do you buy something or am i totaly wrong?

help please:)

if your looking for a head gasket kit mate..ive just orderd one mysel from tm developments, was the best price i could find..was £86 including p+p..

head gasket went on my car..could drive it from cold for bout 5-6 miles then it starts to overheat..i noticed the thermostat was fucked to.was told this couldo casued it.

i have orderd a new gasket set from tm developments

a new thermostat..

and i have been quoted £80 to get it skimed and pressure tested..

im not the best when it comes to the internals off an engine.. but when the car was runing it was stil boosting at 0.68bar i think it is and ther wasnt any smoke..

im just wondering if my bottom end and valves will be ok?

any help would be great

oryt...thanks mate ...il try that tomorow morning(fingers crosed it is just a fuse).

i was just gna replace all the fuses in hope that it would help.

newbei here .just bought my first starlet today...needs a bit of tlc but it will soon be back up and runing within 2 weeks and lookin back to mint condition ;).

wen i got the car this morning the cd player worked but then all of a suden just stoped working...no life to the display at all...tryd another cd player that i have and stil nothing.. cheecked fuses and ther allright....any help would be great ?