Mart

Finally an update again.

With some extra funds these last few months have been a bit busy.

The old kit if finally gone.

New back bumper, side skirts, bonnet and front.

She got resprayed aswell.

Thanks very much guys.

Mart...

Absolutely amazing Phil.

Been folowing this thread for awhile now and Im super impressed...

I used a Universal Intercooler set-up with mine and its perfect. Think I got it from Universal Intercoolers.co.uk if you want to check them out?

This happened to mine aswell Riko. I had to saw one of the flanges aswell...

have you done the rear ones too then?

fancy making up a second set?!

There was also custom spacers made for the rears aswell and extended bolts, nuts etc put on but she's still running on the drums bud.

The custom spacers above in the photo are a spare set and the extended bolts etc were gotten from a motor's shop close to us.

I got the calipers over a year ago on parts breaker site so I honestly don't know how hard it would be to find another set SiCaln.

You might be able to pick up a set of calipers on Ebay or something! I'll see if I can get a bit more info on the calipers if you like.

I am in love!!!

seriously! lol x

Thanks very much Jade.

Your car is looking well also.

MART!

Bloody hell!!! knock me down with a feather! smack my ass and call me Fanny!!!! talk about coming out the woodwork man!!!!

f**kin great to see you updating buddy! its about time!!!

some awesome work there as always man!!! keep it up!

Phil.

I know Phil, I had to get back on track again. Yee guys were starting to well overtake me so I had to pull out a few more bits to catch up...

Haha

Awesome job there man, well done. Looks stunning.

Cheers Bildo...

Thanks man...

Mart...

I know Liam, sorry mate, You know me now, things get done slowly but surely. Haha

Have to stsrt cracking into more mods again but there's always something to get.

Thanks for the feedback guys.

They took abit of custom work alright Sicaln.

Front and rear custom brackets had to be customed made from a spare hub I had lying around just to clear the calipers length alone.

Then we needed some extra long wheel studs and same pattern bolts, so we opted for some Ford Rally ones.

Bit of adjusting, wacking and welding later on they went.

Even after fitting the calipers are only a few mm clear of the rims...

Ok Guys, Another bit of an update...

The Car got mapped a few months back,

Myself and the mate dropped our two cars down to West Coast Performance to a guy called John,

Sound out lad and was well friendly and seemed to know his stuff quite well.

I told him I was looking for the map to be more on the safe and reliable side rather than the biggest power I could get.

So the car was set on only .85 Bar on standard 95 octane juice and was set up only on AVCR and SAFC.

So it made 178 at the fly, 147.7 at the wheels at 0.85bar on 95 oct juice.

Which I was quite happy with so more to come with some better management.

For the last few weeks we have been a bit busy.

With the extra power my standard brakes weren't up to the job and my SR Rad was starting to shit itself so I had to get to work on these...

First I got some nice calipers from a GTR a year back and now with my Standard Brakes starting to go It was time to got onto my mech's machinest...

First of all I had to get some extra long wheel studs. These being a bit of a kick in the rocks to get a toyota fitment we opted for some Nice Ford Rally ones as we knew these wouldn't be likely to snap off so easily...

With a few templates later and some sweet engineering the machinest designed these Custom Spacers out of Aircraft Metal...

Then going back to my mech he managed to custom fit these baby's on...

We had to change the Rad aswell so we ordered a nice new black one.

And here it is again.

We also adjusted the camber in the front and rear...

And here are the pics of the new discs and calipers fitted.

275mm, 25mm width vented Discs with extended lines and new fluid.

We had hardly no clearance between caliper and rim... Haha

Hope you like them.

Sorry again about the late updates but were moving along slowly...

Mart...

Ask for a refund back mate if your not happy with it as it was clearly wrongly advertised.

Man what a killer...

Hey Idrees, Do you still have the front clear indicators left?

Cheers for the help Rob.

Im going to try and post the graphs up on TGTT to see if any of the Irish guys can help me on where to go to get this sorted.

Really appreciate the advice bro. This could save me blowing up my engine...

Mart...

Thats for the advice Rob, Any Idea's what I can do to fix it?

Maybe a run on another Dyno?

I was hoping to break around 170 at the fly Enzo so I was well happy with the result.

with slightly better management and popping the boost up around 1bar. My mapper said I'll easily crack over the 200 mark.

So im well chuffed.

Plus I used no FCD just FPR and SAFC so it was like a little experiment aswell...

Thanks Keirz and Rob for the replys.

Not too sure about the fueling graph as it was overfueling before I sent the car down to the dyno but now since I got the car back the fueling seems fine.

It doesn't have a strong over fueling smell like It had before and its not hesitant in any way. even fuel consumption seems much better now aswell...

Welcome to the site mate.

Well finally got round to getting the Starbo mapped,

Myself and the mate dropped our two cars down to West Coast Performance to a guy called John,

Sound out lad and was well friendly and seemed to know his stuff quite well.

I told him I was looking for the map to be more on the safe and reliable side rather than the biggest power I could get.

So the car was set on only .85 Bar on standard 95 octane juice and was set up only on AVCR and SAFC.

So it made 178 at the fly, 147.7 at the wheels at 0.85bar on 95 oct juice.

Is this a good result from the Graphs??? and does the graph curves look ok???

The car feels totally amazing, Really torqey and brilliant on the road, Im very happy with the performance of it, just want to get a few opinions on the graphs. Thanks...

Mod List Is:

4-Efte Engine Conversion

Blitz K100 Hybrid Turbo

Blitz Actuator

Zisco Mild Steel Tubular Manifold

Relocated Front SR Rad

Front Mount Intercooler

Walbro Supra Fuel Pump

Rising Rate Fuel Pressure Regulator.

4efte Inlet manifold

RX7 Fuel Injectors

Custom J-Auto Straight-Through Exhaust System

Zep Racing Decat

TS BOV

Greddy Oil Cooler

Greddy Oil Filter Relocation Kit

Greddy Oil Thermostat + Grex Braided Hosing

K+N Filter Relocated to Front Grill off Turbo.

Air/Fuel and Boost was set up on:

Apexi AVCR

Apexi SAFC

Thanks Guys:

Mart...

Right i now have everything sorted, no boost creep, no intercooler leaks no nothing.

Only think is im not hitting full boost till 4k, ive been told this is laggy as fook and should be more like 2.7k full boost.

Could this be due to the fact there was a crack in the wastegate? (i didnt know it was cracked when buying and wouldnt have bought it if i did know)

If not any other ideas?

Hey mate, Im running a Blitz K1 and I find it very responsive. As recommended there are Ideally suited around a bar and I'd seriously recommend getting it set-up properly on a dyno session.

I had the same prob as you, When mine was set to .6bar (when I did the conversion) she was spiking right up to a bar when giving it some, With this I got the whole lot set-up properly to 8.5bar safely on the rollers. She's still spiking but with slightly better management eventually, I'll increase it to a bar etc...

Mart...

Your licence plate is in it too bro. Might be worth editing just incase... :surrender:

I nearly kill my son after that. Haha

was lucky nobody was in front of the car...

Your car is looking amazing now mate.

Great stuff Phil...

It seems to be much harder to read posts as the screen is now smaller with the Navigation block on the left.

Maybe I just need to get use to it...

Stupid Aprils fools to be honest mate. Pretending the site is hacked. Isn't that going to turn people away when the click on the site thinking its after been hacked...

This is what Im getting.