-
Content Count
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by minispark
-
-
It could be something simple like the PCV valve.
mine was smoking but not on boost and that was the turbo! can u just squirt some carb cleaner through the pcv???
-
I used a ring spanner and a hide mallet. Just keep hitting the spanner in the same place with the same force. Concentrated force/power aim for the bar in between the spanner heads (If you know what I mean?) as close to the end as possible... If you are going for the freeze method, go to the plumbing section in B&Q Freeze kit spray. £12. Good luck, hope this helps. I'll be changing mine fully in the next week or so, just replaced the back with standard springs temporary as one broke.
Sweet
just get a bigger bar! anything will come undone with the right leverage! if not then heat! Freezing what that all about?????
-
Hello everyone, is there anyone in the kent/gravesend area that fancies fitting my polybush engine mounts for me! I will obviously pay the price just not sure as i havent done them before! many thanks
-
They can be pressed out or you can cut through the bush with a hacksaw blade then hit it out.
Jack
cheers dude
-
Hey everyone can anyone tell me if the standard engine mount bushes on my ep82 will need pressing out or can i get them out myself??? many thanks
-
you might get a small drop in pressure due to the longer pipeing but it will be fine. It will feel a little quicker too but nothing worth shouting about. get yourself an adjustable actuator,mani, decat and exhaust system then up the boost!
hi there im sorry i didnt make myself that clear lol! i meant a standard spec engine.. it has a decat and exhaust hks bov and soon to have mani!! so goin for a fmic will be worth it!
-
hi i want to put a FMIC setup on my ep82 i want to do more bits to it along the way but want to put a front mount on it! will i get any lag what will it performlike?? will there be any difference at all?? any help would be great!
-
the EP91s have two brackets.....can only assume the EP82 does too if so send a few pms around to people who are breaking them expect to pay £0-£10 tops
kool many thanks
-
Any other ideas/advice?
-
Any other ideas/advice?
hi! MY ep82 is delocked all round and i have a clifford. I dont know about the 91's but with the 82 i can get to the bonnet catch to get itopen and then you can charge the battery from then on if you need to. It makes the car look really clean and as long as youve got a goodalarm then youll be fine!!
-
hi i have recently purchased my ep82 and want to fit my stereo! the only problem is, is that there is nothing in there to hold a stereo..... all i have got is a massive double din hole! Im assuming there is some sort of cage that bolts into the hole then the stereo bolts or fits into this but i have nothing! could someone help and possibly supply me with such a cage!
many thanks!!
-
hack it apart really lol, ive hacked some of mine apart and the dash is held up with tape at one side lol
is there a metal cage that bolts into the hole for the steeo? i have nothing in there at all! i wanna fit a stereo but theres nothing to support it!!!! help!!!
-
hi do u do these and if so how much??
-
what year is your car?
1991 h
-
mine is a 91 model! H plate! so can i not use any wishbone off of an 82? or if the wishbones from the 91 come with all the bushes will it still not fit??
help!!!!
-
98 onwards ep 91 had a different rear bush and is not interchangeable, theres a big black metal bracket holding it on, it should be obvious when you look at it
mine is a 91 model! H plate! so can i not use any wishbone off of an 82? or if the wishbones from the 91 come with all the bushes will it still not fit??
-
hey guys can anyone tell me are ep91 wishbones the same/fit the same as ep82? i.e can i put 91's on my 82???
-
finally got round to actually securing mine properly the other day. what i done was file the bracket on the car so its big enough for the end to go through and got myself 2 of the c clip things from toyota instead of the usual 1 and put 1 either side of the ride bit on the line. if you have the line you will know what i mean. hell of a tight fit but if ya flatten out the clips a bit as they come with a bend in them then ya can get 2 on. twice as secure as before
exactly what i was thinkin but justwanted to mke sure cheers bud!
-
howdid you secure the fitting after you filed out the bracket could you describe as from what i can see even if you file the bracket its still not going to be totally secure???
-
will any ct9 turbo fit? even off a glanza?????
-
so is there no different distributors in this country for the panels? the car has had a front ender so may need new parts but if toyota cost a fortune then dunno where to go???
-
hi there does anyone know a good place to get all body panels from, (new ones) and not just outer body work i mean more structural stuff like inner wings and slam panels and lower front crossmember???? any help would be great!
-
cheers for the info mate. ill get lookin.
-
hey guys. im new to the starlet scene but bought an ep82 cheap but it neds a turbo. just need to know what i can put straight on there. im assuming that it is a standard turbo thats on it. I also need a rad and fan. It is an import and as quad lights but i dont think tey are standard. any help and advice would be great and lso is there any specialistsin he medway/kent area???
Pictorial On How To Post Pictures
in Off Topic
Posted
can anyone tell me why my posts that i put in parts for sale keeps getting deleted! 3 times now starting to get a bit peed off with it! ive reduced the size of the pics in photobucket so i dont see the problem!