benjie

I haven't gotten that far yet. I am looking into going turbo. And trying to see what is involved in modding the harness as I might have to do it myself. Anyone you have should be a good starting point just so I can get an idea of how much work is involved. Preference would be EP91 as it would be more likely to get with less miles on it.

4EFTE repair Manual? Does anyone have one? Mostly interested in the wiring diagrams for making the harness but the whole manual would be great.

5EFE with Coil Packs So I came across one yesterday. The information stated that it was for 95-98. I never really saw one before. Can that engine work with a Gen 1 and if so is it straight drop in or is there more work required?

Forum Style Lime please.

Why don't you get a regular JDM 5EFE? They should be easier to find or you could just see if you can find a non JDM 5EFE at the breakers.

My guess would be spun bearings. Possibly need new/rebuilt crank shaft and connectors which means removing the pistons. I would recommend getting a JDM engine. Lower mileage engine from japan would probably be your best bet. By the way, which ever way you go< get a new oil pump. If you are doing the work yourself, make sure you prime it before installing.

Yep Gen 1. I'm looking for a lense like this one but apparently it's custom. http://img204.imagevenue.com/loc370/th_049...s_122_370lo.jpg I understand it's full custom job but fir now I amintereste in a clean lense.

Does anyone know of any companies that will make a non fluted glass as replacement for the standard headlights? They don't have to make the whole thing, just the glass. If you know of anyone, please let me know. Franklin

Hi Steed, do you have the transmission code/model for that tranny? Also I ,might be interested in getting one so I would like to see if there is an American equivalent or if I would have to order one from across the pond?

94 Paseo 162000 on the odometer probably close 166000. My speed cable was busted for a few months.

Hi Steed, what six speed tranny bolts up to the 5e?

Regarding the swaybar end links, We have a company in the States called energy suspension that makes polyurethane bushings and the bolt as well. I needed it as the oem bolt snapped in my hand as I was changing it. If you are interested, the part number is enrgy-suspension part# 9.8122 It comes as a kit with the 8 bushings 8 washers 2 sleeves 2 lock nuts and 2 bolts. Just as another option www.energysuspension.com/ .

Just about everywhere you go to shop for tires, there is some kind of table that tells you if you have this size wheel, buy this tire. No where do I see them take into account the width of the wheel. I have seen 15 X 5.5 wheels as well as 15X7. Does not the wheel width matter when selecting the size of tire? For example, I currently have 15X6.5 wheels. Prior to that, I had 15X5.5 off of a mini cooper. Both called for a 195/50/15. The 6.5 feels planted a lot better to the ground.

So as not to post jack anymore of steed's post, I am creating a new post. Regarding using the manifold from a bug eyed corolla, can that run on a stock car or would I require aftermarket electronics to make it happy? I have a 94 paseo 5efe and I'm not looking to turbo. I just want to get every drop i can get out of his car.

I know it's silly question but is the distributor adjusted correctly? Also did you check your air hoses to make sure they were run correctly?

Sorry for the ignorance, was this car ever sold in the US and does it require a lot of mods? I loked up 4efe on wikepdia and it said that the corolla had a 4efe engine but when I look up corolla's i see no referrence of it at all having a 4efe. they make note of a 4afe though. Just want to make sure this is even an option for me over here.

Hi steed, what benefit does the corolla manifold provide? Also what year corolla is it from and how much modding is required to make it fit?

Can you show me where you could purchase an enclosed cone filter?

Thanks again Pierros. would you happen to have any pictures of how the pipe was cut. I actually had to swap two tranny bolts to make the down pipe fit (one had a bigger head than the other). It is very close right now and every once in a while when the car is at idle, I can hear it vibrating. I have gone to a couple of muffler shops but obviously not the right one because none have recomended cutting the down pipe. It's more of an annoyance but I want to get that taken care of. By the way, are you using the stock engine mounts are did you try the powerflex polyurethane ones? Do you feel

Thanks for the answers guys. One other question, what is the difference between the 1905 and the 1888 bushings. The 1888 says 34mm and teh 1905 says 31. Do you know if its different between the EL44 and EL54? I want to make sure that I get the right ones. Also, when you installed the OBX Headers and downpipe, did you have the cut the down pipe? Do you have any issues with how close to the tranny it is? Any recomendations for that?

Hi Pierros, is there a reason that you did not change the rear control arm busings as well? I see that Super Pro sells them as well.

Hi Stevo, why would you have to move the cat back or cut the down pipe? Is it because the down pipe hits the tranny?

Found it. The clip for the starter is broken and the connector vibrated off. slipped back on and we are good. I have been runing over some rough roads. New York City pot holes are the worst.

Ok, got up started the car just fine. Pulled into the parking lot. Parking lot attendant jumps out of the car to call me asking if I put a kill switch on the car. I have power no dimmed lights. Turn the key but starter doesn't swing. Look for the button by the clutch and its still there. It's plastic is there supposed to be a piece of metal for contact purposes or is it just a plastic switch with electricl contact inside? Any way give a push start and it starts. So it's parked in the lot for now. Any ideas or do you think its the starter?

Have you guys found sources for anything Gen 1? I am looking at headlights right now and having a difficult time. I wanted to go custom projector but I am being told the fluting of the glass destroys all of the benefits. I was actually looking into have lenses made but the cost is very restrictive unless you guys know of someone cheaper.