StuDoc 72

There are a set of those up for sale on this here forum

Sorry Simon had them in his breakers thread. They were SR3's but were identicle. Sold now though.

aye i have to get it moted before its registered so garage going to take it to get moted since there insured. then ill get it back rip out engine and get all the engine/turbo/ecu put in have to take it to get a map put on it to run it in. then ill register and insure it drive it to run it in then get it mapped properly. should stop alot of headaches as the local mot station is a granny garage so trying to explain to them why they should pass a massive front exit exhaust is more hastle that its worth then by time its due its next mot it will be up and running so i can take it to a friendly garage that understands imports lol

My old work mate.

Hand them keys......PASS IT!!!

Passed ;)

Pm'd Jezza. Ill be up tonight defo mate as I needto drop the Mrs off up there and pick her up later on so its kl.

Sound Allan give us a txt later if your headin up pal.

I suppose then your just getting it re mot's each year means they arent picking away at it. I assume you will register it as a turbo tho?

Awww I see lol good I got a bit concerned there was thinking well ive just bought it fuck getting another 1 lol.

Its no that its just trying to get people to do it. Always up for the idea then when it comes to the crunch..nuhin. Fuck it im putting it out there see what happens.

Haha mate I can imagine it would be painful. Why you mot'n it tho if your just gna rip it apart lol?

Ditch the Gizzmo and your boost issues will dissappear.

Something like a Blitz DSBC will do the job much better than a Gizzmo.

Cheers

Mike Jones

Tuning Developments Ltd

Are these all directed at me? I dont have a Gizzmo EBC its a depo 1?

I can do them any day mate you know me.

Its just hard enough trying to get people to agree lol.

How about this 1 any thoughts?

I have a Tongs CT9 and when it goes on boost around 2500-2800 its shoots up to 0.8-0.9 for avery quick second or 2. It then settles higher up the revs around 0.5-0.6. I know you will get a slight spike with initial boost but it shouldnt be this far above what its holding any body came across this before?

I still have the standard top mount which I know wont help.

Plus i think my actuator is pretty loose as without the EBC it only makes about 0.2-0.3 so I was going to tighten that to about 0.4-0.5 and see if that helped.

Any suggestions to jump start my thoughts would be helpful though.

Anyone going up the night?

Needty pick up the burd from there so might go up earlier if I can get a few of us??

Dont do your alignment until you have the suspension set up. Its a waste of time.

They will use guages on the back and front wheels to set them up and if they are doing full set up will adjust the camber also.

Bringing down the back end will then upset all of this.

When doing alignment the 1st thing you do is check tyre pressures. If a few mm in your tyre wall makes a diff then it sitting like a monster truck at the back will send it way out.

I 100% would wait untill its all done 1st.

Nice GT mate I like.

The 106 tho not so much........u sold the right car lol

Take a pic of the shock and let us see incase you are adjusting the wrong part

I dont think clamping has ever been legal in scotland. As for towing if its from the owner of the car park then im sure they can get it moved as its private land. Should find out who owns it mate.

Still looking for FMIC

Which clips? The 1s that hold the lense and casing together?

I think they are 50mm but not 100% I could try and find some info through HKS archives or somthing. Ill have a look for a pic buddy and post it up.

Yeah joiners hammers are too light mate

Check out CJ performance there is a group buy for DGR ones on there and they are very reasonably priced (about the same as most 2nd hand 1s)

If you think they are more than what you want to spend. I have a tidy shock and spring set up in the for sale section.

Sticky brakes?

Was just at the wind up mate because you said can you get one but obv you will need 1 for either side.......not good having to explain lol.

I dont imagine it would have to come out to remove the engine mate but might be helpful if it is. I wouldn't waste your time or the money on antifreeze just fit it when the engine goes back in.

UP

Its what you would expect to pay for 1 that needs a rebuild it costs a fair bit though.

I thought the only difference between a and b was an extra exhaust blade no?