diller

Hi mate, Was wondering if you have any of these back in for an Ep91???? Cash waiting to send........

Thanks Diller

As above guys if anyone is selling a 2nd hand good Varis bumper please Pm me here or message me on Facebook here:http://www.facebook.com/djdiller

Thanks for reading,

Diller.

Dean pm comin yer way mate

Diller

Wel guys was busy while my car was off the road got a few bits done and fitted

All the white interior bits gone and steering wheel surround fitted

Remember this haha

Way cleaner now

And Uv Film i removed from the windows

Hks Relocation Kit Fitted at last

Gonna try get the short pipe tidyed up soon or get one similar size done to tidy it up

the light i got were glued an chipped and cracked

like below--->>

Bit of the glue i was hackin off haha

Got into cleaning them---->>>

Collected me lenses today and Walla

Decided to fit parcel shelf speakers then

Kitchen was like a workshop haha dicided to tidy my steering coloum surround as it was

sprayed bloody white, tried strippin the white off so here it is

Drying off (in the kitchen )

Another box of tricks i have for the engine

New Plugs, altenator belt & power steering belt, Ultra Plug leads and New

Water Pump and Cambelt kit was also Fitted.

Thanks for reading

Diller

Pics of her at the start,kinda sucked. skirts wer screwed on an looked sh1te and the front

splitter wasnt fitted the best either to the front bumper:

Rear bumper was like patch adams haha:

So here she is home, got Back Bumper with Oem lip, Rear Carbon Spoiller, New door fitted, took off the 1 wind

deflector that was on it, Skirts Sprayed and fitted tighter also the Front bumper & Splitter Sprayed and fitted tighter,

Carbon Bonnet, 99 Spec Rear Lights, the wipers resprayed black as they wer faded aswell.........think that it

The wheels ar goin for refurb next

Lambda Sensor's ordered

It was rough before i got the timing an all done mate, it was a problem previous to the belts been done.....anything to do with timing was all tested an

retested again to make sure they were ok......there is a blow in the flexi aswel an im sure with the flexi been close to the decat that wouldnt help the sensor???

just some every day pics

Any Joy with this mate????

Ive disconnected the sensor an it idles the same as when connected so im gonna try a new one in it an see if it makes a difference when Camskill

delivers it

If it started happening after you got the belts done that kinda ponits to the problem!

Are you certain the timing is bang on?

Also you can run these cars without a lambda sensor, disconnect it and see what it does?

If i disconnect it, its quiet possible its gonna be the same as is, but yes the timing is spot on an all. i had a mechanic check timing yesterday

and all he said everything seems ok and the link above points to the sensor been the problem mate

Ok guys done some homework online with the problems and this ticks all the boxes http://www.ehow.com/facts_4899182_symptoms-bad-oxygen-sensor_.html

Wel lads was with the mechanic today and he said it a fueling problem a bad mixture or something.....he checked plugs, timing belt an all seemed sound

so im just wondering if my fuel pump could be on the way out????

Under low revs its at its worst like doin 30-50 kph around town it could chug up the street an then on idle it runs as in video. But

when i have it on the open road doin 80-100 kph it seems not to bad like.

Also ive noticed i do not have this sensor in my engine bay but where it goes to on the intake is blocked off---->>>>

Any help greatly appreciated

Diller

Crank seal mine was leaking an the belt was throwing the few drops from it all over the place......but check the sump and turbo oil feed also

Hi guys, got all belts done last week and woke up to this after i started it this morning, its seems the car is hunting. I was

wondering does anyone know wat might cause this as it's doing my head in........

Ive put in new plugs aswell......and in low revs it nearly cuts out if im goin to take off in it.

[media]http://www.youtube.com/watch?v=JXU69v-bDPE&context=C394646fADOEgsToPDskLdOSTkGslizMLgcii_TQ9U

Any help appreciated

Diller

Hey guys looking for one of these kits please for ep91

Money waiting to be sent just need confirmation from you that you have them

for delivery

Thanx Diller

Was just reading threw your gold build thread last nite an quiet enjoyed it, looking forward to this one

now for some top work mate

Diller

They look the business mate

yea mate there in this colour though ---->>>

Hey lads just wondering would Cynos seats be a straight swap into a glanza??? i can get a pair from

a 94 Cynos and there Mint......any info please

Thanks Diller

Very nice car mate....and good plans too

diller

Replyed bud

Wel bud, whens this gonna be available i would love one, could you Pm me a price delivered to Southern Ireland please

Diller

you have just mad my day i was wondering wat orange wheels

would look like on glanza

noice car mate

Very noice motor Idress......great strong quality car ;)

diller

Lovely car mate free bump