Dicky-Art

Runs perfect! Cheers Dangee

Finally got it bolted up

I have one here if you are stuck mate? Can send it today

Cheers pal but payed for one 2 weeks back.

getting to 2 weeks now Socks! Where's this cable?

Well can't get the bugger fitted! 3 full days trying and stripping more bits off to give more manoeuvrability! Just borrowed a hoist but still no joy!

:sad: :sad:

Socks...PM sent, received, replied!

Posted to Ulverston LA12 9NP

Speedo cable wanted - single piece as below

The threads were loose and it unscrewed easy! But the parts A & B are still solid, can't even move with stillies and molegrips!

Left soaking overnight. If still stuck will need to remove from car and get in the vise.

Just got to remove the broken bit now!

Hope the replacement gearbox is ok!

ooops! didn't want to do that did I? But it's now disconnected.

B turns separate to A. That's the bit that unscrews. Slide pliers are your friend.

Or you Could always undo the bolt beside it and pull the whole speedo drive out together the you can get at it better.

Good thinking batman!

Can't get the speedo cable off the gearbox help needed please!

Read that the cable sheath should be held and the metal sleeve should turn.

Does A turn independent of B? Or does A+B turn independent of the cable going through it? Noticed that A has a hole into it just above the larger diameter of B.

OK cheers, noticed there weren't any a couple of years back but I had trims on. Lowered and black steelies now!

Yea be wise change clutch wen your that far if it wasn't replaced resently

My thoughts too....£50 for 3 piece kit from http://www.carparts4less.co.uk/?gclid=CO2HxJaAnrwCFUT3wgodGjIA-g

googled a discount code and got 7.5% off!

You can get Apex ones brand new for £85

New wheel bearing fitted but no grease caps to keep the crap out

Both sides needed!

Well I've started doing it myself on the drive.

Spend all day clearing air box/battery/clutch cylinder and linkages out the way and removing the drive shaft. Couldn't split the bottom ball joint and couldn't remove the three bolts on the control arm. In the end I unbolted the strut and steering joint and the shaft levered out the gearbox easily with a tyre lever. Took the hub nut off to removed the shaft totally.

Stopped when it started hailing.

Got a new clutch for it too.

Gearbox should be here Tuesday.

Should be here by Monday

Cheers Dan

I have a 4efe gearbox here low mileage

Could you pm me with details? Cheers

£100 ?

How much am I looking at for a garage to replace a supplied gearbox?

How long do you think it would take?

cheers Spoon but no idea if they'll fit!

Better stick to 4EFE EP91. Ta

5 speed gearbox for a 1997 1.3 Sportif 4EFE EP91.

Gearbox is howling and about to give up on me!

Cheers