Glanza Mac

Where you guys from? Rob.

Me and another glanza will be there all weekend if nine makes it :-) Rob.

No point lieing, the videos would tell the truth anyway :-P Rob.

I don't think I'll be going down the strip due to it being a low compression motor with no turbo, it will be pretty slow :-P But I'll make some videos :-D Rob.

Bit more progress, Ngk iridium heat range 8 plugs bought and in Cv joint bought and fitted Extended wheel studs bought, will be fitted at a later date 4 new toyo t1r proxies bought and ffitted The new tyres on my new rims, unfortunately the weddsports have gone also :-( Team dynamics alloys with a large offset for the k sports to fit with no spacers :-) Sitting flush Pictures of the front will be taken :-) Engine bay as it stands now Front bumper back on so it looks like a complete car again :-P Took the car for a drive up and down the street, wheel bearing on the passenger side front has gone and has alot of play in it making my caliper touch my wheel on the inside so new wheel bearing needs to be ordered and fitted, santa pod is 5 days away so no rush haha, pressure is on! Rob.

The hoses are here More to come tomorrow :-) Rob.

Socks may have one :-) Rob.

Cheers mate :-) Rob.

It already rattles as it is, along as it's all tight I'm not fussed :-P just glad it's not my daily haha Rob.

Thanks dude, it's called a billion carbon air duct, rhdJapan sell them Rob.

Dave Vivian at Vdm :-) Rob.

I am excited too haha :-P just want all my parts etc to arrive :-D Rob.

New mounts have arrived :-D Hasports billet race mounts, u88a rating which hasport class as 'extreme race'. Strut brace back on after ends being painted The bay as it stands Some black Teflon an6 braided hose and black end finishers I do have some more to fit to the fuel pressure regulator but waiting for my adaptor to arrive. Few more bits to arrive and then I can rebuild the steering system/drivetrain and take her for a spin :-D Rob.

I can get some Hondas to come along and another glanza if they are welcome :-P Rob.

No I havnt but I reckon if them ones in the picture are yours... That you should sell me them :-P Rob.

I love my carbon back end :-D Rob.

Pm'd Rob.

Still got them? I'll take them Rob.

I'll take a few trips down there :-) Rob.

Not at the minute, still need to source a downpipe, oil and water lines and a tial bov Some more progress has been made :-) Black braided fuel return pipe Aem fuel pressure regulator.. Doesn't fit due to my inlet so an adapter needs to be bought :-( Strut brace ends resprayed Nardi leather steering wheel bought from Lew777 :-) Not the best picture so will get a better one. Best progress is I have started the car as she lives again! Cv joints to be ordered today and then I can get it all back into one peice :-D Rob.

Hey, did you need spacers with these to fit over the k sports and do you have any pictures of how they sit with your archs? Cheers Rob.

Also liked :-) Rob.

I'd buy all this when you can courier :-) Rob.

New sard fuel pressure gauge Exhaust back on I unfortunately didn't get to start it due to having a turbo sump on the engine and I need some braided hose for the fuel line. Not much now until I can strike it up :-) List of parts needed is: 2x cv joints Braided hose Hose finishers N/a sump 75mm silicone hose for the induction Millers oil Rob.

Abs will be coming out when the turbo goes on :-) It's slow progress but I'm in no rush Rob.