jordan walker

Just tried that there and still no go:( are my wires in the righ places ?

Its new and Yeah the grey one is cut Just tryed connecting up the white wire aswell and it still doesnt work anymore ideas ?

Thanks buddy ill give that a try now

Set it too what? And surely the gain doesnt matter as its not even limiting the revs?

Yeah ive heard all the bad rep on them but i still want it on the car and working Some one must have fitted one too a glanza ?

When i turn the rev 1 and rev 2 dials it flickers on every now and again Also i havenet connected the white wire to the handbrake will this make any difference

I have wired it up like this using cable lock connectors Its not lighting the unit up so my guess is either the live or earth isnt right what do you guys recon?

Are you sure buddy? Do you not want me to atleast pay for postage or summit?

I dunno weather its that one or not mate its the one that goes too the turbo

I thought they where off a subaru?

I have a td04 on my car and need a new banjo bolt for the oil feed is the td04 defo off a subaru or does it not matter im in desperate need of one please help

'' sub good '' ( not very good ) not very well worded i agree

Its wierd like i just expected it to be worse but so far it seems better haha more power, more mpg and more noise ... Td04 ftw lol

What does it meen if it spits a load of oil out of the breather like? Also where are you from and what boost has the car been ran on?

I dont know if im honest but on my ct9 setup at 1 bar i was getting between 30-40 miles to a tenner but the td04 seems alot better for some reason :s and ive been booting it all over this last week ill do a little test and let you know

Ive just made 230.5 on td04 with a jam at 1 bar and the garage said it was fueling spot on.

Sorry bud must have Forgot to mention bang on 1bar

TD04 update yo!

If you have any luck setting your ebc up let me know as ive got one and dont have a f***ing clue how to set it up lol

If you mean a straight swap for a ct9 then no you need a different manifold and a different decat

Has anyone got one yet ? Im having a bit of chew setting mine up its all installed etc i just dont understand the instructions

Its done now thanks for the help guys

Cheers buddy but im still none the wiser the instructions tell me where to put the solenoid wires its the pressure thingy im stuck with theres one vacuum pipe on it and it says put this too the fuel pressure regulator is this right? This is what it looks like The vacuum pipe im on about is at the top and the wires beliw it run too the solenoid and the wires right at the bottom run into the car to the controller can i snip the pipe on the fpr or does it have fuel in it?

Basicaly its the first time installing ebc and external wastegate and im struggling its one of them new greddy profec ones where does the pipe from the pressure sensor unit go? It says in the instructions cut the pipe on the fpr and put a t piece in there is this the right way to do it? Hope this makes sense

Thank you much appreciated