Cattanach

How low do these go mate ?

I'm tempted to run 1 bar on a hybrid through the standard tmic!

Probably go bang though haha!

I have an rx7 tmic but tempted to sell as they don't look that pretty haha

I'm there Friday - Monday!

6am coach from Edinburgh!

Absolutely buzzing!!

Get the boost cranked up feed the Mine's!!

Adjusted the actuator today actually! Goes well at just under a bar! But I'm itching for more power so I've bought a td04 manifold and downpipe hahaha

Looks very smart mate and good mods bear the exact route i went (less the mines ecu)

Cheers mate! It's slowly coming together! Still lots of work to get it how I want it

How much difference did the rx7 cooler make dude?

I personally think it made quite a big difference!

A lot better than the standard one!

Bumpp upppp

That on stock boost?

Few pics from Scottish car show, was on a mates stand called "OEM+"

Few pre SCS cleaning pics....

Got a bit busy earlier and removed the charcoal canister and A/C idler stuff!

Engine bay isn't the prettiest but it's functional for now! Will look a lot better once I fit the silver rocker cover and some black silicone hoses to replace the random blue ones haha

I just looped these together for the charcoal canister, should be fine right ?

And all the crap removed....

Still got the fmic ?

Bet it goes a bit better now from when i was standard?! Haha. Will hopefully see ya up Crail in it

Yeah a lot better!, yeah you probably will, i will most likely be at the Vag day in September haha

Ahh my old wheels nice update! How does it do compared to stock with the mines ecu and rx7 topmount?

I ran a 15.8 at crail when it was standard with just the catback exhaust, then I fitted the mines Ecu and it ran a 15.4 could've been a 15.3 with a slightly better launch I think!

Need to see what time it makes now with the decat and rx7 top mount etc! Hopefully under 15 seconds

Been busy with the car lately!

Although haven't gotten any pics.

Managed to remove the aircon, fit the manifold and decat and Hks Actuator with the help of a mate!

I then ordered up the bits to make my own filter relocation kit! Only cost £25.

Also removed the yellow headlight film.

Will get some pics up soonish.

Currently on the hunt for coilovers and a front mount so if you've got those then let me know!

Bump! Managed to get a rocker cover!

Bumppppo

Bumppp

Need mine this low!

Looks cracking!

I want to the Scottish car show yesterday and there was more r34 gtr's than starlets....that I seen anyway. Think I'll have to get another soon, some stunning ones for sale I've noticed

Yeah only a few starlets at SCS!

My mk3 GT, a mk1 GT and think I saw 4 glanzas! That was it though

Man that's awful! R.I.P

Fmic

Td04 setup parts ( manifold, downpipe, turbo)

Ep82 cooling panel

Coilovers (anything so long as no leaks etc)

There's only one input into the hks actuator!

Standard actuator has two!

May I ask why you want to run the hi-lo boost ?

I have no idea what you have on it already but:

House every weekend - David Zowie

Summer - Calvin Harris

They don't know - Disciples

Basically spent today fitting my air filter relocation kit and my Blitz Bov, also tried to adjust my Hks actuator but wouldn't budge only the rod was turning!!

Fitted everything back up and I have no boost whatsoever!, boost gauge gets up to -2 max!

I've double checked all intercooler pipes (rx7 Tmic) checked the bov pipes and they're tight!

Any ideas ? I'm meant to be on a car stand on Sunday and now it's not looking likely

Not sure if it's Hks but it's definitely an adjustable actuator, someone's used a nut and bolt instead of the little pin and C Clip

Oh my days!!!!

Since the last update I've fitted:

- HeavySet purple power steering hoses

- Mines PnP Ecu

- Rx7 Tmic

- Boost gauge

May take off the yellow film on the headlights! Want it looking a bit less in your face!

The yellow film was on when I bought it so I'm unsure how it looks without haha

Also need to get my arse in gear and do the following

-Fit manifold

-Fit Decat

-Set boost to 1 bar with Hks actuator

-Remove aircon (hoping an experienced member in the area may help with this)

-Get a spare rocker cover and powdercoat it black

Facebook - Kyle Cattanach (cover photo is my GT and a mates Glanza)

Instagram- kylecattanach91

That might be an option for me! Stirling ain't that far from Edinburgh either!