sosolid
-
Content Count
706 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by sosolid
-
Ok cool and also i dont really do track days and use it on normal roads so those oils ar all good for normal use, yes?
-
Aint 5 40 bin for a 20 year old car?
-
thanks cool
-
Would i need to run better injectors if im pushing undr 200bhp on a glanza? im running ct9 hybrid, 1 bar on blitz ecu.
-
Car is modified. Hybrid ct9 with full supporting mods and ecu running close to 200.
-
Cool what make is good. FuchS, Mobil, Millers, Gulf, Castrol?
-
So its that time. Under the bonnet it shows 10 30 which you cant get, so Ive been using 10 40 semi synthetic castrol magnetec oil, but what oil are others using and would recommend?
-
Those who are not sure. Found this link https://www.youtube.com/watch?v=mqXa2DiSEX4 Thanks everyone for your input.
-
Yeah ive got a picture of the Toyota Service Information and it shows that you can retard or advance by maximum 2 degrees either way but 10 degrees is bang on. It shows you need to short-circuit the T and E1 connectors at idle to play with the timing.
-
So 10degrees is base setting. So if I Advancing or retarding by 2 degrees what will happen? Mines got full mods ct9 hybrid and ecu.
-
So 10degrees is base setting. So if I Advancing or retarding by 2 degrees what will happen? Mines got full mods ct9 hybrid and ecu.
-
Cheers nick
-
What size is the nut that holds the steering wheel on for a Glanza?
-
As above with rails so a straight bolt on job.
-
So the biggest socket I got is 24 and its not big enough for the Knock sensor so what size would I need for it?
-
please lock
-
Where can I get clear side repeaters for my Glanza? Mine have gone yellow after 20 years.
-
thanks for replies guys. bought one from TD. please lock.
-
lambda sensor. same problem i had. check it out
-
is there any difference between part number 89615-22040 and 89615-12040? im finding alot of the second one. they all fit celicas and supras
-
So today i got the code 52, which is the Knock sensor. Wheres the best place to get one?
-
So i decided im going to change the seal and plug on the camhsafts. Whats the process of changing them?
-
no im gona take the top part off. hope its that.
-
So i changed the distributor o ring seal and all done. thanks guys. There was alot of old oil and grime when i took the distributor out. Cleaned all that with degreaser and brake cleaner and all done. Now to sort out the other leak from the bottom of the timing cover.
