P44YNE

As above any other plans??

John

Next step is to strip all the rear interior and add a C pillar brace and rear strut brace.

I would also perhaps like a front mount and maybe increase the boost from 0.7, but don't want to risk damaging anything.

Anyone recommend a good boost setting for listed parts?

surely that psi is too high, personally i put in 26-28 front and 28-30 psi in the rear, personal preference tho

I thought the same but my mates look a bit flat with sub 30, I'll try a 31/33 set-up tomorrow....

I went with the Parada's after all... 34/36psi front/rear. I'm rather pleased with them!

I've posted up a quick spec list and some long overdue photos in the members rides section

Just thought I'd post up a brief spec of my car accompanied with some pictures. Any comments or ideas welcome

(May 2010)1998 Toyota Starlet Glanza V Silver.

Exterior

• HID 6,000k Bi-Xenon Hi/Lo headlights.
  
• HID 6,000k Xenon H3c fog lights.
  
• White SMD sidelights.
  
• Front LED indicators with load resistors.
  
• Rear LED indicators with load resistors.
  
• Red LED tail/stop lights (all 4).
  
• White SMD reverse lights.
  
• White SMD number plate lights.
  
• Wind deflectors (not fitted).
  
• Aero flat blade wipers front and rear.
  
• Impul WRC 15 inch wheels.
  
• Yokohama Parada Spec 2 runner all round.
  
• Silver metal dust caps.
  
• Subtle 'SLOW AS F*CK' JDM style sticker in silver.
  

Interior

• Recaro reclining bucket seats.
  
• Recaro passenger rail.
  
• Bride driver rail.
  
• Swoosh boost gauge.
  
• White SMD interior light.
  
• Tegiwa black gear knob.
  

Engine

• HKS fuel cut defender.
  
• Manual boost controller.
  
• TM Developments fuel pressure regulator.
  
• Toyosports stainless steel exhaust manifold.
  
• TM Developments stainless steel braced de-cat downpipe.
  
• A'PEXi N1 middle section.
  
• HKS backbox.
  
• Blitz Supersonic blow off valve.
  
• Air conditioning system fully removed.
  
• Air filter relocation kit.
  
• Green Cotton cone air filter.
  
• Oil breather filter.
  
• Uprated red HT leads.
  
• Iridium spark plugs.
  
• Lightened and balanced flywheel.
  
• 6 Paddle clutch (forgot make).
  
• eBay special purple oil catch tank.
  
• Fuse box cover, radiator brackets, timing belt cover and a few other bits painted purple.
  
• Systec 255 fuel pump.
  
• HKS oil filter.
  
• Magnetic sump plug.
  

Suspenion/Chassis

• OEM front strut brace.
  
• Tein adjustable coilovers (height/damping).
  
• Adjustable top mounts.
  

Security/I.C.E

• Viper 5601 - Remote start, auto turbo timer and remote central locking with a 2,000 foot range.
  
• JVC USB/MP3 head unit.
  
• Alpine Type E front speakers.
  
• Infinity rear speakers.
  
• Vibe wiring kit.
  
• SPLX monoblock amplifier.
  
• SPLX 12 inch subwoofer.
  
• Subwoofer box tuned to 33htz.
  

Posted here by accident!

Is that behind the dials?

As far as I can see, the hazard switch isn't the flasher relay but without the hazard switch the indicators don't work at all :S

If you know of or can find out where the flasher relay is or anyone for that matter I would appreciate it very much

Where is the indicator relay on a '98 Glanza???

My boost gauze makes a kind of vibrate'y, rattly noise a various points. Very annoying! Do I need a new one or will a replacement do the same thing due to a set up issue?

Without adjusting anything I decided to observe where it sits and what's happening is it's idling at around 1.5k when cold but not dropping when warm... Could this be a sensor fault of some variety? Rather than needing to adjust the idle speed?

Thanks mate!! I'll try it later and let you know the result

Could anybody advise me on how to adjust the engine idle speed?

I'm literally just giving up on wiring some resistors in, the ones I've been sent do exactly the same thing as they do without.

Annoying!!! Lol

I'll try your washer idea but if theres a boost leak, would it not hold boost? It's sits at 0.6bar solid...

Shouldn't be, it's done identical to mine. Mines at 0.9bar and his is at 0.6 as it was before and where it remains no matter how it's adjusted + or -

I've got four tail/stop LED's in and whenever I put the light on my abs light comes on too lol.

Maybe the same kind of principle o the LED indicators needing resistors because the voltage is so low it thinks it's missing a bulb and blinks too fast?

Did you get the £2 eBay specials? Or proper ones with built-in error free things?

As the title says... Any ideas?

I've just installed a cheap MBC on my friends Glanza, and it does nothing. Boost is the same no matter what the setting!

I have an identical one on my Glanza and they are connected up the same and mine works fine.

Any ideas anyone? Please? Lol.

I desperately need a passenger seat rail to mount a recaro to.

Anyone know where I could get one or if anyone might be selling?

Even if it needs modifying to fit the seat, as long as it goes straight into the floor and is lower than standard rail height.

Any feedback appreciated

Any passenger side seat rail other than standard needed ASAP!!!!

im awaiting payment on it but if they pull out youve got next

Ok mate, thankyou

Have you still got the air filter relocation kit mate? My friend wants it.

I'll get a close up tomorrow in the day light lads. As for the stickers, it has one on each wheel on one of the spokes saying 'Impul WRC'

1998 Toyota Starlet Glanza V

Only 75,000 miles!!

Beem in the country since May 2010 and I'm the 3rd UK owner.

The spec list is:-

Exterior-

White 15" Impul WRC

195x50x15 Yokohama Prada rear tyres 

195x50x15 Toyo Proxes T1-R front tyres

Tein adjustable height and damping coilovers Adjustable top mounts

LED rear bulbs conversion

HID head and fog lights (6000k)

Interior-

LED interior light (white)

Swoosh Boost Guage

Recaro bucket seats

Security-

Clifford viper alarm with remote start and auto turbo timer

Engine-

HKS FCD

TM Developments down pipe decat

Blitz blow off valve

Green cotton air filter

Air filter relocated to grill

Air con removed

front strut brace

apexi n1 system from down pipe to back box

HKS Power Backbox 

Walbro 255 fuel pump

TM developments Fuel pressure regulator

Exedy Uprated clutch

Lighteded and Balanced flywheel

HKS oil filter

Magnetic sump plug

Wax oiled underneath

I'll post some pictures when I'm back on the computer, just done this quick from my phone.