Squeak-Glanza

Here's my entry.

Here's a couple of mine

cheers ill try drying the plugs out as soon as i can then.

The problem all started last week, i went to start my car and it wouldnt start & the engine light was coming on so i had a look and thot it might of been the plugs getting wet as one was rusty and i dont have a top mount now so thought water was getting in the vent.

I got new plugs and fitted them, the problem went away well so i thought went for a drive everything was ok until i booted it then the engine light came on again and it started popn & banging.

When i got home i tested what codes were making the engine light come on and its telling me codes 31 & 34.

Can any one help me out with what could be causing this.

any good ideas to stop the water getting in...

i mine is working fine now i put the new plugs in and it runs fine, think it just as you say having no top mount lets all the water run down onto the plugs...

I've got the same problem just going to fit my new plugs the now, is your engine management light on?

here's the link for the pdf copy.

http://www.ukstarletclub.com/forums/index.php?showtopic=6124

Kool cheers for that ill be fitting the decat asap then

I've got a new de-cat to put on my car but it only has one threaded hole in it for the sensor at the top end of the de-cat, but my cat on the car has two sensors one on the top and one on the bottom.

My mates say i dont need the bottom one fitted but im not sure what to do.

Can anyone help me out, cheers

Here's my entry...

I same here am interested in getting some 98 spec lenses, how much would they cost???

Just fitted the sard fpr and with the vacum off its 26psi and with the vacum on its sits at 35psi what is right or are they both rite...

Cheers people ;) was hoping for twins but will just have to do with sisters lol

Seeing it was a nice day we thot we'd get a wee photoshoot done with our glanza's and make the most of the weather :angry:

totally this is a fcking joke...

Here's my entrance...

thieving little fcks...

n yeah i think the site should get a bit more security

Hi Brian about time you got your pics up of her lol...

n ricko666 the civic is a beast it got a turbo fitted n its a freash import aswell :angry:

cool cheers for the help dude

cheers for that... this mite sound stupid but wat vacuum hose do i take off

Hi am going to be fitting my Sard fpr tomorrow and im needing to no what pressure to set it at?

I have a hks adjustable actuator and front mount on and im wanting to be running .8 bar.

Also will this stop ma car hitting fuel cut???

squeak

looks good! a like the bumper makes the front mount stand out

Thot seeing it was a nice day the day ad get ma oil catch can on, and here it is...

looks good a think...

falkland are very good like rubixcube stated above been there with my mate who got his cupra re-mapped and rollered definatly one of the best around here and in scotland

I av heard of Falkland think al try them... cheers