redliner

So i got a set of hubcentric wheel spacers, but I want to put spigot rings on does anyone know the centre bore of buddyclub p1 alloys 15", 

I measured the wheel at 70mm centre bore, could some1 confirm?

Thanks ger 

Had the same problem so I got them pressed in, even doe most people were saying they should go in with a tap of a hammer/mallet, even the mechanic that pressed them in said it was alot of pressure to press them in,,

Ah just asked them do they do bleed valves for brake calliper's an they all said no,

Rang toyota an they can get them for 9euro for the 2 of them, so will just get them there

Yes I recently priced them in Toyota, were over £5 each tho. In the end I got a pair in motor factors for £1.50

Rang at least 4 motor factors and none of them do the bleed valves didn't bother trying the rest, so hope toyota do them, at a prise no doubth,

Good tryed and tested so 👍

All you need to do is enlarge the hole so you can get a decent torx bit in

Right might try that, sound for the help👍

Aw cool that's the job, was worryed couldn't get them, just get them out now, is welding a bolt to it the best bet getting them out??

So went to bleed the brakes but the bleed valves sheared off on the 2 back calliper's when or if i get them out can I buy new 1s from Toyota to screw back in?? Much help needed,,

Thanks ger

I paid around £280 both sides amazing job

How much did the welder charge for the job if ya don't mind me asking? Must get it done to my glanza? Would a panel beater do this job??

This info will come in handy when it comes to repairing my sills 👍

No companies will start a new policy on a jap especially over 10 years old. Transfer is the only way and liberty seem to be the only ones that will still do it. When you do just say youve just bought it. After that just keep renewing until you can get classic.

Was with liberty on the glanza so they will have me details,

Was talking to chill an he said the only way is to transfer my policy bk on the glanza an start new on the golf which will be about 1300 each,

Be hard to go paying that for the golf when I'm only paying 460 a year on the golf,

Ya I was told that before, roll on 2018 so,

Ah I hoping just to insure it straight away but that hope is fading

How old are you and what year is the glanza?

I'm 30 glanza is 98

Try green light heard they're good 4 glanzas mate

Any number for these? An will they cover here in south a ireland

Ya I agree I bet they don't have a problem in England insuring jap cars I'm sure there loosing out on money the spa's,

It's gone to the dogs this country,

What's the point in nct if ya can't insure it an it's road worthy,

I'll try those insurance company's so lads,

Thanks

So i bought a golf last year an took the glanza off the road, went about putting it back on the road but no insurance company will cover the glanza because it's a 98 car and it a jap import,

So whatinsurance company's are ye with???

anyone know where I can get a set of these the 1s that were out years ago,

I can only find moman dials not as nice as the set I had years ago,

Thanks ger

The hubcentric spacers ain't universal are they? I haven't seen any mention of universal fetmet,

So i just checked an there no spigot ring on me alloy wheel,

What happens if I don't put these on with the spacers?

An if so I take it I get 54.1 in size

More money 😲

Im running ebay spacers, youll need spigot rings for them, and the nuts are a bit shit.

But its worth the saving, i paid 70 for a set of four

Y do i need the spigot rings would they not be on the alloys?

Ya a friend told me the size to get the cheapest I can find on e-bay is around 90pound for 2, which is 105euro then 10euro for postage,

Not many that are 4x100 there all mostly 5x100,

I want direnza make but they don't do the size for a starlet an I'm looking for 15mm, anyone no do they do these??

Links

Thanks ger

Ya I guess so that's why there expensive an ebay 1s are cheap