Jump to content

Relocating the injector loom under the fuel rail


Recommended Posts

Just remove the plastic that the loom sits in, unplug the injectors and then feed the loom under the inlet and pull the plugs through the gap between runner 2 and 3. the only thing you might need to extend is the plug for the ICV. Turn the injectors gently without pulling them out so that the plugs face the inlet. I wrapped the loom in High temp waterproof PVC for a bit of protection but more to keep all the wires together and tidy. I also put a thin wrap of yellow pvc on the wires for injector 2 and 4 to differentiate them from 1 and 3.


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...