Legend009 Posted February 2, 2018 Posted February 2, 2018 I am not sure if this has been posted before, however I’m getting a set of twin pot calipers together with the hub. Does the hub bolt on to the Ep82 or are there some mods needed? Quote
5e colin Posted February 3, 2018 Posted February 3, 2018 Ya for sure the strut holes don't line up I remember that long ago on 1 of my budget diy coilys if the driveshaft slots in then your I. Luck it be a simple install Don't forget the endface distance on the backside of the hub shaft might be shorter ???? Or not Quote
morgey Posted February 3, 2018 Posted February 3, 2018 Ae111 Levin hubs that come with twinpots won't fit as theyre from the super strut model which is a completely different suspension setup to the mcpherson used on starlets. The top of the hub is mounted to the shock with a ball joint and the lower mount is 2 balljoints to connect to 2 separate wishbone arms Quote
5e colin Posted February 3, 2018 Posted February 3, 2018 cool so its the non superstruts then are all SS twinpots ?? morgey Quote
morgey Posted February 4, 2018 Posted February 4, 2018 All ae111 SSS are twinpot yes, not sure on the ae101s. If you fit them to the non SS (mcpherson) hubs you end up with 260mm brakes. But if you use celica caliper carriers on the mcpherson hubs you can space them out to be 275mm like the SSS setup. The mcpherson hubs are the same as uk corollas. Quote
Legend009 Posted February 8, 2018 Author Posted February 8, 2018 Thanks guys. I think I’ll stick to the celica one. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.