Should the front anti roll bar be knocking??

[gwtaylor]

Should the front anti rollbar be this close?

[rob_bower]

seen a few people have this problem with thick arb’s hitting lower arm mounts I had some spacers made which I might have somewhere. But those droplinks need tightening up. 

[gwtaylor]

1 hour ago, rob_bower said:

seen a few people have this problem with thick arb’s hitting lower arm mounts I had some spacers made which I might have somewhere. But those droplinks need tightening up. 

Cheered rob 

I didn’t even notice they needed tightening as I bought it as a project best get it checked and go tighten every bolt

 

wherr would the spacers go?

[rob_bower]

Yea the droplinks definitely wants tightening up. I’d also check that lower alk bush as there shouldn’t be that much of a gap. 

 

The spacer sits under the arb to chassis mount to drop it down the same amount as the alk plate. 

[Di_Bodi]

Here it is my thicker TRD one - tight but never knocked

Should have it painted before fitting!!

I have the spacer plates made up and fitted at the same time when fitting anti-lift kit. No knocking luckily!

and the TRD bar still not painted...:(( laziness!

at least it's undersealed now