No spark, need second opinion

[Ep82_Matt]

Hey lads, this has being covered many times but i need a second opinion, long story short ive no spark, my car is an ep82 5efhe build and at first i thought it was my ignitor untill i realised ive no 5v signal from the ecu, now everything is as it should be, 12v to ignitor coil and both are grounded to the firewall, what i discovered is the dizzy is not sending signal from the crank angle sensor G- to the ecu, also neither are G1 G2 or NE would i be right in saying the dizzy is whacked or is there something else causing this? Bit strange how all pins on the dizzy arent sending signal 

 

[chrisp96]

Did you ever find the solution? I'm having the same problems 

[mccartney11]

I had that issue and I replaced the distributer

[chrisp96]

I found the problem mine was the ignition control module faulty