the-dalester Posted April 20, 2008 Share Posted April 20, 2008 Does anybody else have trouble with there interior light in the ep-91 starlet?myn doesnt cum on wen u open the door and it doesnt always cum on wen its switched 2 the on position, i have 2 take the plastic cover off and mess with the bulb 2 make it cum on.do u reckon i need a new interior light unit?anybody got 1 they dont want?cheers every1! Quote Link to post Share on other sites
Starletraje Posted April 20, 2008 Share Posted April 20, 2008 had this problem. unscrew the switch from the door, clean it, spray some WD-40 on it and put it back on, leave it for a bit and then try it, should work. if not then i dunno, guess you need a new one. Quote Link to post Share on other sites
Lukey_B Posted April 20, 2008 Share Posted April 20, 2008 haha mine doesnt work at all!lol but i might try that ^^, just to see! Quote Link to post Share on other sites
nic1.3 Posted April 20, 2008 Share Posted April 20, 2008 hey mate i had this problem the contacts on the switch were rusted on mine....soldered a bit of wire on to bypass the rusty bit...works a treat now. either on off or or set to work with the door Quote Link to post Share on other sites
J18 RSA Posted April 21, 2008 Share Posted April 21, 2008 hey mate i had this problem the contacts on the switch were rusted on mine....soldered a bit of wire on to bypass the rusty bit...works a treat now. either on off or or set to work with the doorreally really really noy taking the p155 try a new bulb had thes problem and it was just where the bulb was getting old Quote Link to post Share on other sites
SiCaln Posted April 22, 2008 Share Posted April 22, 2008 these are always a bit naff in the eps, your best pulling off the cover and bending the pins retaining the bulb inwards slightly to hopefully create a tighter grip on the bulb Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.