ChineseMafia Posted April 25, 2008 Share Posted April 25, 2008 hey guys i juts got all the parts together for my engine rebuild how ever i just need to ask 2 more questionsin an early post i asked about the torque settings for the head bolts in the repy i was to to torque them in order so question1: what is the order when replacing head boltsquestion 2: what size on my filler gauge would i use to set the tappets ?thanks guys Quote Link to post Share on other sites
StarletRick Posted April 25, 2008 Share Posted April 25, 2008 the 4e has overhead cams, it doesnt have tappets, it used over-bucket shims, which should be fine if you are using stock cams. the head bolts are in 2 stages and bolt out in a star pattern from the top centre. ill try to find you a diagram, because i cant remember off the top of my head. Quote Link to post Share on other sites
ChineseMafia Posted April 25, 2008 Author Share Posted April 25, 2008 once again thanks rickthat diagram would be greatly apreciated Quote Link to post Share on other sites
sx_turbo Posted April 30, 2008 Share Posted April 30, 2008 once again thanks rickthat diagram would be greatly apreciatedthe best thing to do is buy a corrolla haynes manual, that has a 4efe engine.and all the torque settings and diagrams, and how to's are in there.i found this book a great help, when working on the enginethe 4efte and 4efe engines are almost identical, the only things being different are the pistons and rings. Quote Link to post Share on other sites
ChineseMafia Posted May 8, 2008 Author Share Posted May 8, 2008 any chance on getting a soft copy of that mabe a pdf or somthing? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.