Crossfade Posted March 8, 2010 Share Posted March 8, 2010 Ive just had my head rebuilt but im not sure how to time both cams up as the exhaust cam runs the intake cam im not sure how to time them up because i had to remove the cams to refit the head any ideas guys ? Quote Link to post Share on other sites
Russleh Posted March 8, 2010 Share Posted March 8, 2010 no doubt someone with more experience will help ya in a min but if i remember correctly there should be a mark on each cam gear that should align with each other mate. have a wee look at all the teeth on the gears and ya should find them. Quote Link to post Share on other sites
riko666 Posted March 8, 2010 Share Posted March 8, 2010 find a service manual - there's a dot on the back of the intake camshaft gear, and two on the exhaust, and these must line up perfectly, i.e: Quote Link to post Share on other sites
Crossfade Posted March 8, 2010 Author Share Posted March 8, 2010 find a service manual - there's a dot on the back of the intake camshaft gear, and two on the exhaust, and these must line up perfectly, i.e:Spot on top man ! Life saver thanks . Quote Link to post Share on other sites
Danturbo4311 Posted March 8, 2010 Share Posted March 8, 2010 dont forget to tension the intake gears if a service bolt wasnt fitted when removing them. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.