garbla900 Posted March 15, 2010 Share Posted March 15, 2010 im rebuilding my cylinder head after i noticed a crack in one of the manifold mount but i have some additional parts in the gasket kit one looks like a exhaust inner clamp and a threaded round piece. i can put up pics if need be im just woried if i have missed anyhting that is necessary any ideas ? Quote Link to post Share on other sites
Guest Enzo Posted March 15, 2010 Share Posted March 15, 2010 im not sure what your asking, a cylinder head gasket kit from toytoa is around 100 notes and contains all the parts you need.if you are rebuilding the head you might aswell port and polish the echaust side if your handy with a dremel. Quote Link to post Share on other sites
garbla900 Posted March 15, 2010 Author Share Posted March 15, 2010 ive got the head ported allready and ive bought the garket kit and replaced all the gaskets i can find but i got spare and i dont know where they go and was wondering if peps could lighten me on what the fudge they are? Quote Link to post Share on other sites
Dan Evans Posted March 15, 2010 Share Posted March 15, 2010 get some pictures up of the parts mate Quote Link to post Share on other sites
garbla900 Posted March 15, 2010 Author Share Posted March 15, 2010 here are the bits that i dont know where they go????? any clues guys? Quote Link to post Share on other sites
garbla900 Posted March 16, 2010 Author Share Posted March 16, 2010 aney idea guys enzo (aka the guru) could tell me what parts these are? Quote Link to post Share on other sites
garbla900 Posted March 24, 2010 Author Share Posted March 24, 2010 any ideas guys i dont wanna torq the head down untill i know what these are or if i need them??? Quote Link to post Share on other sites
micky boy Posted March 24, 2010 Share Posted March 24, 2010 If i was you mate i would send Dave@TMDevelopment a PM or send one of the PP lads a PM they should be able to help you out then you can get your engine back together much quicker Quote Link to post Share on other sites
Asad Posted March 24, 2010 Share Posted March 24, 2010 1-3 look exhaust relatedthe packet seems to contain the washers for the rocker cover nuts and a few other bits can you get clearer pics? Quote Link to post Share on other sites
Dave@TM-Developments.com Posted March 24, 2010 Share Posted March 24, 2010 Some exhaust gaskets, injectors seals and Rocker cover washers by the looks of it. Pics aren't that clear Quote Link to post Share on other sites
Russleh Posted March 24, 2010 Share Posted March 24, 2010 well im deffo sure the first ones are of the exhaust gasket or washer whatever ya wanna call it from an n/a because heres a pic of mine that i just got from toyota little ones in the bag do look like the washers for the rocker cover but unsure off the big ring one. set them all out and take another picture of em Quote Link to post Share on other sites
garbla900 Posted March 24, 2010 Author Share Posted March 24, 2010 the plastic packet ive just discovered were injector washers and rocker cover washers. ill get clearer pics up tmoz see if you can help a tad more. i dident think the n/a and glanza had the exact same head if its a generic head kit or anything?? Quote Link to post Share on other sites
Asad Posted March 24, 2010 Share Posted March 24, 2010 Yup its the same kit Quote Link to post Share on other sites
garbla900 Posted March 25, 2010 Author Share Posted March 25, 2010 okay thats all bit found a home bar this one if these pics arent clear enough let me more and ill get out the big guns of a camera lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.