ktl Posted May 25, 2010 Share Posted May 25, 2010 can i use the standard banjo bolt that goes near the oil filter housing into my td04 oil line ? and is it a m14 x 1.5mm bolt? Quote Link to post Share on other sites
ToyotaTech15 Posted May 25, 2010 Share Posted May 25, 2010 It depends if the oil line is the same size as the old standard one, usually it should be ok but just match up the pipe ends to see if they are the same and try the bolt in the pipe and join it to the oil filter housing to see if it will all seal upAnd i would recommend a fresh banjo bolt washer which will be available from Toyota if the pipes are the same.Gary Quote Link to post Share on other sites
RobSR Posted May 25, 2010 Share Posted May 25, 2010 If it's the end that goes onto the filter housing it can only be one size, otherwise it won't fit the filter housing. If the td04 + line were originally fitted on an EP you won't have any problems. Quote Link to post Share on other sites
ktl Posted May 26, 2010 Author Share Posted May 26, 2010 nice one guys thanks for that! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.