Johnny Posted June 17, 2010 Share Posted June 17, 2010 Hey guys, just need some help with the setup (that im hopefully gonna run)Atm, my car is only running a decat, Blitz Nur spec, Hks Actuator, Blitz air filter.To go on:-Toy tuning Ct9 HybridHdi or Wepr FMIC (couldnt decide which, so just bought both, lol)Zisco externally wastegated manifold (Ram Style)Apexi AVC-R boost controller Greedy Emanage Blue PiggyNow have a few questions. Im hoping to run the car at around 1.0 Bar, i dunno how much cabable the hybrid is???Im shopping about for a Tial 38mm wastegate, and unsure what size spring to go for? its all getting very confusin!Will my hybrid need the wastegate welded shut or can it still run on this setup the way it is? I will plan later on to buy Ezno's TD12 hybrid, but atm im looking at getting a 200sx, so gotta wait a while. Any advice would be most welcome, also more details on toy tuning hybrid if anyone has any Quote Link to post Share on other sites
rinseep82 Posted June 17, 2010 Share Posted June 17, 2010 you will need to weld the standard wastegate shut i am running a standard turbo with a turbosmart 38mm external gate and the full kit is amazing the respnse its alot better and they hold boost perfect.dale. Quote Link to post Share on other sites
Ryan-11 Posted June 17, 2010 Share Posted June 17, 2010 38mm wastegate will be fine. yeah u have to weld the wastegate closed on your turbo. Quote Link to post Share on other sites
Johnny Posted June 17, 2010 Author Share Posted June 17, 2010 you will need to weld the standard wastegate shut i am running a standard turbo with a turbosmart 38mm external gate and the full kit is amazing the respnse its alot better and they hold boost perfect.dale. What size spring did you use mate? think fuel cut is 0.8Bar, and standard is 0.6.So im guessing 0.7??? Quote Link to post Share on other sites
rinseep82 Posted June 17, 2010 Share Posted June 17, 2010 well the spring that comes with the wastegate on mine is 7 psi (i think) but they do come with other specified spring im noy quite sure tho as i baught it second hand and i havent had a look loldale Quote Link to post Share on other sites
Johnny Posted June 17, 2010 Author Share Posted June 17, 2010 What injectors do you recommend? Quote Link to post Share on other sites
Ryan-11 Posted June 17, 2010 Share Posted June 17, 2010 if u want to run a low boost at..... say .6 bar just get a .6 bar spring and trun the boost up to 1 bar with the avcr. standard injectors will be fine for a hybrid at 1bar Quote Link to post Share on other sites
Marck glanza V Posted June 18, 2010 Share Posted June 18, 2010 on mine i have a 0.7 bar spring. also with that manifold depending on what decat you have it might not fitmarck Quote Link to post Share on other sites
Johnny Posted June 18, 2010 Author Share Posted June 18, 2010 on mine i have a 0.7 bar spring. also with that manifold depending on what decat you have it might not fitmarckI have a Zep decat mate. The manifold i wanted keeps stock position.Hence reason i didnt buy Wepr's one. 0.7 Spring it is then. Just need to find somewhere down south to map all this shit in July if u want to run a low boost at..... say .6 bar just get a .6 bar spring and trun the boost up to 1 bar with the avcr. standard injectors will be fine for a hybrid at 1barThanks buddy! My Avc-r arrived today, looks sweet. Was stuck in damm customs for 2weeks, grrrrr! Quote Link to post Share on other sites
Marck glanza V Posted June 18, 2010 Share Posted June 18, 2010 i have the same manifold and what my problem was is the pipe coming down the side for the external wastegate was stopping the decat fitting onmarck Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.