TheStarletGT Posted October 22, 2010 Share Posted October 22, 2010 The following pics below is of my intercooler system as done by the previous owner. As you can see, the previous owner did a bodgey ass job of sealing. On the turbo outlet side,there is a 3 inch silicone hose joining a 2.5 inch metal pipe that joins to the 2 1/4 inch intercooler pipe inlet. On the intercooler outlet side, the 2 1/4 inch outlet is joined via a 2.5 inch silicone hose. As you may have possibly read in the drag section, i did a 16.0 flat down the quater mile. Looks like this intercooler bodgey sealing may have contributed to the poor time.IC 2 1/4 outlet joined with a 2.5 inch hose >Comparisons, 2 1/4 inch, 2.5 inch, 3 inch. Im going to make my IC outlet half 2 inch and half 2 1/4. Quote Link to post Share on other sites
jezza Posted October 22, 2010 Share Posted October 22, 2010 Definately going to cause a leak with incorrect sized joiners. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.