Tommy_G Posted January 9, 2007 Share Posted January 9, 2007 Well as you may well know i bourght a GT turbo spoiler. for my EP91 solidanow, although being a car geek, ive never done any bodywork stuff before. i should be fine spraying etc, but i need some instrctions on how to fix it to my car.A couple people have suggested screwing it on, then bonding it on. thing is im not sure where to screw, presumably i need drill holes in the boot etc?Cheers Tom Quote Link to post Share on other sites
Idrees Posted January 9, 2007 Share Posted January 9, 2007 You'll have to screw it on for it to be secure. Drill 2 holes at the top of the bootlid and screw them in to the spoiler. Also use Stikkaflex on the inside of the spoiler so its nice and tight, but please DO NOT seal it with that (Meaning use it on visable areas) or else it'll turn into some nasty yellow colour after a few weeks, happens to the SR's front lip all the time!! Quote Link to post Share on other sites
Tommy_G Posted January 9, 2007 Author Share Posted January 9, 2007 right, cheers idrees... but wont the spoiler crack? oh and its got two. bolts sticking down in the centre, presumably that used to fit into the GTs boot?can i use the old GT thread? or is it easier to make new ones?Cheers Quote Link to post Share on other sites
Idrees Posted January 9, 2007 Share Posted January 9, 2007 Easy to use the old GT thread. What to do is, mark out where them threads go on the bootlid, and drill two right sized holes out.Then use a bolt on the inside to tighten it up.Make sure it a nice fit, then take it off, put Stikkaflex on all the inside, and fit it back on again.Good luck. Quote Link to post Share on other sites
Sparky Posted January 9, 2007 Share Posted January 9, 2007 That will look sweet when its on!!!! Quote Link to post Share on other sites
Tommy_G Posted January 9, 2007 Author Share Posted January 9, 2007 yer it should....and streetracer_starlet, they pretty much do. cheers guysill show you the progress Quote Link to post Share on other sites
Tommy_G Posted January 9, 2007 Author Share Posted January 9, 2007 well in that case yes it does, but i think i make need some of the previous fixings removed....other than that seems pretty straightforwardwell easy to some1 that knows what ther doing...aka not me Quote Link to post Share on other sites
SiCaln Posted January 9, 2007 Share Posted January 9, 2007 im sure baz used to have 1 Quote Link to post Share on other sites
miracle411 Posted January 9, 2007 Share Posted January 9, 2007 Glad to hear you got it safe mate, Baz has one on his Glanza and also chall had one on his and i've seen a few others, it can definately be done mate, just sus it all out then attack it. Quote Link to post Share on other sites
Tommy_G Posted January 9, 2007 Author Share Posted January 9, 2007 yea cheers delivered in top condition. yer ill have a look in the light...then spary it etc. whos baz? is that the entire username? anyone know if he fitted it himself. Quote Link to post Share on other sites
SiCaln Posted January 9, 2007 Share Posted January 9, 2007 yea he did but he has his own spray shop, he used to have a orange V then sprayed it to Kawasaki green and blCK Quote Link to post Share on other sites
miracle411 Posted January 9, 2007 Share Posted January 9, 2007 Quote Link to post Share on other sites
SiCaln Posted January 9, 2007 Share Posted January 9, 2007 Cheers dude Quote Link to post Share on other sites
miracle411 Posted January 9, 2007 Share Posted January 9, 2007 No prob Si Quote Link to post Share on other sites
Sparky Posted January 10, 2007 Share Posted January 10, 2007 Im sure Baz's is blended in Quote Link to post Share on other sites
Tommy_G Posted January 10, 2007 Author Share Posted January 10, 2007 yer his is, i dont like that look as much as bolted on...look Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.