shavnh Posted January 27, 2011 Share Posted January 27, 2011 interior light not working in ep82. where to start. before anyone say it the bulb is fine Quote Link to post Share on other sites
lukEp Posted January 27, 2011 Share Posted January 27, 2011 Check the door switch it gets stuck over time. If you pull the rubber up and spray some WD in there might sort it, if not could be the box behind the clocks Quote Link to post Share on other sites
Wantaglanz Posted January 29, 2011 Share Posted January 29, 2011 the switch isn't stuck, where abouts is the box? behind the speedo? Quote Link to post Share on other sites
1987glanza Posted January 29, 2011 Share Posted January 29, 2011 check your fuses Quote Link to post Share on other sites
Wantaglanz Posted January 29, 2011 Share Posted January 29, 2011 checked them mate Quote Link to post Share on other sites
1987glanza Posted January 29, 2011 Share Posted January 29, 2011 the other thing you could try is get a curcuit tester or power probe, disconnect the lamp its self & jus check to see if ther is a power supply & a good earth goin to it, other than that im not sure what else you try Quote Link to post Share on other sites
Wantaglanz Posted January 29, 2011 Share Posted January 29, 2011 ok cheers mate Quote Link to post Share on other sites
Marck glanza V Posted January 29, 2011 Share Posted January 29, 2011 check that you are geting a 12v feed to the plug behind it if you are its probably the unit. you can test that with a continuity tester just to make sure (thats what mine turned out to be)Marck Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.