Jump to content

Removing sensors, Charcoal canister etc


Recommended Posts

This sensor by the brake servo can be removed

Posted Image

And the plug that connects to it can be cut back and joined together

Posted Image

Still yet to do this

Also this plug can be cut back as it's no longer in use

Posted Image

Also this is what I did to vent the fuel line

Posted Image

Link to post
Share on other sites

The one by the brake booster should be for the charcoal canister vent. You remove this and the canister, plug the line going to the intake, put the line from the gas tank to a breather or with a small inline filter to a hole in the chassis rail. That's what carb cars do.

The other valves the one with the cylindrical thing on it is for the air con. Idle up valve...

All those valves that one line is going before the throttle body and one after, can be removed, but the idle would fluctuate when the related accessories are operated.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...