ollie ryan Posted March 31, 2011 Share Posted March 31, 2011 right my turbo is kicking in at between 3800rpm and 4,200rpm it feels stupidly laggy aswell seeing as its a ct9 hybridalso when driving the boost gauge reads at 0.6vacum and thats when im just cruising at a consant speedim just getting fed up with having such a laggy car nowis my turbo knackered? Quote Link to post Share on other sites
AARON45 Posted March 31, 2011 Share Posted March 31, 2011 my car is the sam mate wot set up u runing Quote Link to post Share on other sites
ollie ryan Posted March 31, 2011 Author Share Posted March 31, 2011 wepr mani, decat, hybrid turbo, port and polished head all surporting mods to run 1bar and going to fit a ebc this weekend to see if that helps at all Quote Link to post Share on other sites
shorty Posted March 31, 2011 Share Posted March 31, 2011 unlikley the turbo , actuator could be?? or a boost leak some where dude. Quote Link to post Share on other sites
ollie ryan Posted March 31, 2011 Author Share Posted March 31, 2011 if it was a bost leak surely i wouldnt hit 1bar?actuator i bought brand new and havnt had it that long, when i remove the actuator the wastegate flap does move freely, it will partly move then stick and needs abit of force to move it the rest of the way to be fully open Quote Link to post Share on other sites
AARON45 Posted March 31, 2011 Share Posted March 31, 2011 i going to fit a ebc to Quote Link to post Share on other sites
micky boy Posted March 31, 2011 Share Posted March 31, 2011 If you think about it if the boost is kicking in at 3800rpm instead of 2800rpm then dosnt that ring alarm bells? the higher through the rev range the engine pusses more air through the turbo there for pussing the wasgate open more then it would be at 2800rpm so if you have got a "leak" it will take longer to open the wasgate. Quote Link to post Share on other sites
ollie ryan Posted March 31, 2011 Author Share Posted March 31, 2011 so its most likely my actuator then?when the turbo was fitted as far as i no, no new gaskets were used so could one be very slightly blowing? as i cant hear anything? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.