hill_bill10 Posted May 18, 2011 Share Posted May 18, 2011 hey just got some paseo clocks, do i need to rewire some of the pins in the connector for these to work? i know you do if its a sportif but wasnt sure if you needed to in an SR.any help would be much appreciatedcheerstom Quote Link to post Share on other sites
Ryan5793 Posted May 18, 2011 Share Posted May 18, 2011 cant you just swap the dial faces? Quote Link to post Share on other sites
hill_bill10 Posted May 19, 2011 Author Share Posted May 19, 2011 tried that, but they dont fit Quote Link to post Share on other sites
hill_bill10 Posted May 19, 2011 Author Share Posted May 19, 2011 come on guys some one on here must of done this!!! how do you do it! need help! need to know what pins need to go where Quote Link to post Share on other sites
Pinkygti Posted May 19, 2011 Share Posted May 19, 2011 yes they do need re-wiring, ie the pins need to be swopped around and 2 wires need to be cut and re-located and an earth made up for the sr models, just completed mine and its perfect, a good mod if you have the pateince ;)there is a link on here somewhere as someone has done it on another model, the sr is simular to this ;) Quote Link to post Share on other sites
ali_legend Posted May 19, 2011 Share Posted May 19, 2011 Pm'd but mate there should be a 'how to that will talk you through it' Quote Link to post Share on other sites
hill_bill10 Posted May 19, 2011 Author Share Posted May 19, 2011 ive seen the how to put them into a sportif or a solida or sumthin, but the SR is different to these. so im either missing wires or have wires that i dont know were they go.if either of you could let me know which you stuggled with it would really helpfrom what remember i think i was left with a red and white wire and a black and yellow wire that i didnt know were they went and was missing a white and black wire i think :S Quote Link to post Share on other sites
ali_legend Posted May 19, 2011 Share Posted May 19, 2011 Same mate I have a sportif and was missing/differnt wire all you need to concentrate on is the ones you need to cut. Leave the one you have got missing etc and try. It's what I did ;) text ya nyway. Quote Link to post Share on other sites
hill_bill10 Posted May 19, 2011 Author Share Posted May 19, 2011 has anyone put these in an SR? need to know the wiring for them into an SR as they are different to other models Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.