JDMtuning1 Posted October 25, 2011 Share Posted October 25, 2011 just looking for an exhaust for my sr , any ideas wich will fit and what will sound nice? Quote Link to post Share on other sites
ryan lang Posted October 25, 2011 Share Posted October 25, 2011 you'll most likely have to go custom dude most places offer a lifetime guarantee too Quote Link to post Share on other sites
JDMtuning1 Posted October 25, 2011 Author Share Posted October 25, 2011 is that not a full exhaust system that i could just buy? looking for a second hand one if possible Quote Link to post Share on other sites
Starlet__SR Posted October 25, 2011 Share Posted October 25, 2011 is that not a full exhaust system that i could just buy? looking for a second hand one if possible Not off the shelf, there was a Fujitsubo system for the N/A available in Japland but is uber rare. Your best bet is to go custom. My advice would be to go to Custom Pipes in doncaster. Great place and the work is spot on! Either that or wait around for a second hand system to pop up. D Quote Link to post Share on other sites
JDMtuning1 Posted October 25, 2011 Author Share Posted October 25, 2011 Cheer's dude! and thats not far from me i will have to pop up and get some price's Quote Link to post Share on other sites
Starlet__SR Posted October 25, 2011 Share Posted October 25, 2011 Cheer's dude! and thats not far from me i will have to pop up and get some price's No problems, they're good guys and will make it exactly to suit. All work is guaranteed for life and its brilliant quality. D Quote Link to post Share on other sites
JDMtuning1 Posted October 25, 2011 Author Share Posted October 25, 2011 Sounds good! i need to get my car on the road soon need's a fare bit of work on it Quote Link to post Share on other sites
Starlet__SR Posted October 25, 2011 Share Posted October 25, 2011 Sounds good! i need to get my car on the road soon need's a fare bit of work on it What need doing to it?D Quote Link to post Share on other sites
JDMtuning1 Posted October 25, 2011 Author Share Posted October 25, 2011 Headlights , alloys , exhaust , stem valve seals and gasket set Quote Link to post Share on other sites
Starlet__SR Posted October 25, 2011 Share Posted October 25, 2011 Headlights , alloys , exhaust , stem valve seals and gasket set Nothing too much then lol, if you need a hand matey i'm only in worksop. D Quote Link to post Share on other sites
JDMtuning1 Posted October 26, 2011 Author Share Posted October 26, 2011 Cheer's dude! what car you got ? Quote Link to post Share on other sites
Starlet__SR Posted October 26, 2011 Share Posted October 26, 2011 Cheer's dude! what car you got ?98 spec Glanza VD Quote Link to post Share on other sites
JDMtuning1 Posted October 26, 2011 Author Share Posted October 26, 2011 You will have to pop up not met anyone else with one yet be nice to see one on the road i ahould be on the road next year ''/ Quote Link to post Share on other sites
Starlet__SR Posted October 26, 2011 Share Posted October 26, 2011 You will have to pop up not met anyone else with one yet be nice to see one on the road i ahould be on the road next year ''/Yeah can do matey. Theres quite a few, DavidAshton, Craig-SR and a few others in your area. Why not get it on the road this year?D Quote Link to post Share on other sites
Billy SR Posted October 26, 2011 Share Posted October 26, 2011 do you still have that black sr rear bumper, i'd have it off you when i pop down that way next if knew someone who could do a decent exhaust cut out Quote Link to post Share on other sites
JDMtuning1 Posted October 26, 2011 Author Share Posted October 26, 2011 Yeah can do matey. Theres quite a few, DavidAshton, Craig-SR and a few others in your area. Why not get it on the road this year?Dneed to pass my test! :'(do you still have that black sr rear bumper, i'd have it off you when i pop down that way next if knew someone who could do a decent exhaust cut out yeahi have mate do you want any other sr body part's got bonnet and front bumper too they need to go! ? Quote Link to post Share on other sites
Starlet__SR Posted October 26, 2011 Share Posted October 26, 2011 do you still have that black sr rear bumper, i'd have it off you when i pop down that way next if knew someone who could do a decent exhaust cut out Cover the area with masking tape, mark out where you want your cutout and use a hole saw, hopefully the drill should be able to locate enough so the saw can start cutting. Also helps to hold a piece of wood or something to the back of the bumper so it eliminates flex/warping.D Quote Link to post Share on other sites
Billy SR Posted October 26, 2011 Share Posted October 26, 2011 need to pass my test! :'(yeahi have mate do you want any other sr body part's got bonnet and front bumper too they need to go! ?just the rear bumper, mine has a nasty chunk out where i got my backbox welded to fit, my local mechanic mate literally just made a cut out, and it isn't as tidy as i'd like it unless the bumper and bonnet were literally next to nothing not sure when it'll be, but whenever i decided to go see my grandparents in leeds, maybe around christmas time, providing they fit in the boot Quote Link to post Share on other sites
mr_oconbhui Posted October 26, 2011 Share Posted October 26, 2011 id go for a custom system i know a lad that got one made up full ss system back to a janspeed backbox was awful raspy sounded savage Quote Link to post Share on other sites
JDMtuning1 Posted October 26, 2011 Author Share Posted October 26, 2011 Cover the area with masking tape, mark out where you want your cutout and use a hole saw, hopefully the drill should be able to locate enough so the saw can start cutting. Also helps to hold a piece of wood or something to the back of the bumper so it eliminates flex/warping.DIts a glanza replica mate i will not need to make a cut out just with the sr engine Quote Link to post Share on other sites
Starlet__SR Posted October 26, 2011 Share Posted October 26, 2011 Its a glanza replica mate i will not need to make a cut out just with the sr engine I know matey. Was quoting billy sr. The engines are lovely to work on lol. D Quote Link to post Share on other sites
JDMtuning1 Posted October 26, 2011 Author Share Posted October 26, 2011 just the rear bumper, mine has a nasty chunk out where i got my backbox welded to fit, my local mechanic mate literally just made a cut out, and it isn't as tidy as i'd like it unless the bumper and bonnet were literally next to nothing not sure when it'll be, but whenever i decided to go see my grandparents in leeds, maybe around christmas time, providing they fit in the boot you can have it all for ermm 60-70..? Are you coming up in your sr mate? Quote Link to post Share on other sites
JDMtuning1 Posted October 26, 2011 Author Share Posted October 26, 2011 I know matey. Was quoting billy sr. The engines are lovely to work on lol. DIs that sarcastic about the engines haha..? i need somone who know an sr engine to come have alook at it it's misfiring andf smoking so bad!! Quote Link to post Share on other sites
Starlet__SR Posted October 26, 2011 Share Posted October 26, 2011 Is that sarcastic about the engines haha..? i need somone who know an sr engine to come have alook at it it's misfiring andf smoking so bad!!No lol. They're quite easy to work on. D Quote Link to post Share on other sites
JDMtuning1 Posted October 26, 2011 Author Share Posted October 26, 2011 No lol. They're quite easy to work on. Dahh good! its my first car just want it to look and run decent! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.