greasemonkeyspb Posted January 31, 2012 Share Posted January 31, 2012 hi guys im trying to get my conversion running im using a glanza loom and ecu with a 4efte engine from a gt......i came to start it and will only crank.. will not fireive checked fuel etc and thats all ok but i have no spark??i was thinking this may be either be a coil pack or dizzy cap/rotor arm...i have power down to the coil pack (12volts)but only 0.73 volts down to the distributor??can anyone help me???regards steve. Quote Link to post Share on other sites
Simon Posted January 31, 2012 Share Posted January 31, 2012 Check the ignitor earth it earths through it being bolted on so worth cleaning it all up. Quote Link to post Share on other sites
greasemonkeyspb Posted January 31, 2012 Author Share Posted January 31, 2012 cheers pal Quote Link to post Share on other sites
StarletMad Posted January 31, 2012 Share Posted January 31, 2012 Have you tried putting a different coil lead? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.