JakeGowing Posted April 1, 2012 Share Posted April 1, 2012 Hi guys!Need some help! i put a new head on my glanza this weekend because my old head cracked, ive had the new head skimed, put a new head gasket on and arp head bolts but when i started the car it started pooring out smoke! my mate said it will for about 15 minites but it wont stop! its mainly when you rev the car but is okay when driving along? i tryed my mates spare turbo but that made no diffrence!ANY ideas? are there any checks i can do with out taking the head completly off again?any help would be appritiated!Thanks Quote Link to post Share on other sites
akyakapotter Posted April 1, 2012 Share Posted April 1, 2012 maybe ringlands id do a compression test fella Quote Link to post Share on other sites
B11G KY Posted April 2, 2012 Share Posted April 2, 2012 valve stem seals ? Quote Link to post Share on other sites
Taggy Posted April 2, 2012 Share Posted April 2, 2012 if it wasnt smoking before then it was with the replacement head its obviously going to be something wrong with that head, like mentioned maybe the valve stem seals are shot on it. Quote Link to post Share on other sites
Nads Posted April 2, 2012 Share Posted April 2, 2012 Sounds like valve seals - do a test mate! only way to determine what the problem is Quote Link to post Share on other sites
JakeGowing Posted April 2, 2012 Author Share Posted April 2, 2012 Thanks i will do a test, also when i took the exhaust manifold off to try another turbo one of the exhaust ports was very oily any ideas? Quote Link to post Share on other sites
akyakapotter Posted April 2, 2012 Share Posted April 2, 2012 (edited) id say valve stem seals mate take a look at this thread half way down page Clicky after the oil in exhaust port. Posted 25 February 2012 - 05:16 PM those set of pics Edited April 2, 2012 by akyakapotter Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.