Chris Green Posted April 12, 2012 Share Posted April 12, 2012 HiI'm about to start the conversion above, however I'm not sure weather I need to change the ecu or would upgrading the injectors and fuel regulator will do the job.If a 5e-fhe ecu is needed is it as simple as pulg and play or does the loom need to be changed?Cheers in advance, Chris Quote Link to post Share on other sites
Chris Green Posted April 18, 2012 Author Share Posted April 18, 2012 Anyone done this before? Or have any info?Cheers Chris Quote Link to post Share on other sites
siren676 Posted April 18, 2012 Share Posted April 18, 2012 The loom has to be changed, Im not sure which bits off each loom you'd need to use as im running a link ecu not the 5e one.Which version 5efhe do you have? the acis intake one or the one with the standard intake? Quote Link to post Share on other sites
Chris Green Posted April 18, 2012 Author Share Posted April 18, 2012 its the standard intake mate, would a paseo ECU plug and play? Quote Link to post Share on other sites
siren676 Posted April 18, 2012 Share Posted April 18, 2012 I wouldnt be sure without seeing the pinouts of both ecu's. It might just be a case of swapping which pins a few wires go to or a complete re-wire.If you could get me the part numbers of your 4e and 5e ecu's i might be able to have a look into it for you.Also good luck with the swap man, its well worth the effort. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.