The Toffinator Posted May 13, 2012 Share Posted May 13, 2012 (edited) Item For Sale:Standard Ported CT9 And JPerformance Braced decatItem Condition & Description:Very good, Only has very slight play, Tiny crack in the wastegate. Has a properly ported wastegate to reduce boost creepExcuse the dirt in the inlet its been sat in my bedroom loft for months!Decat is in good condition and braces to the standard cat point for strength. (Also heatwrapped)Price: £70 POSTEDPictures:Payment & Shipping Details:Pay via paypal and add the 4%, Postage will be next day if possible! Item For Sale:Polished Rx7 Topmount Intercooler with pipesItem Condition & Description:Very good, Few bent fins and marks but nothing major. Was mirror finished should only take 5 Mins to bring it back.Was fantastic on my CT9 Setup and a plug and play, boost was much better and it sounded awesome too.Has the pipe so directly fits straight on nicely, no messing aboutPrice:£60 POSTEDPictures:Payment & Shipping Details:Pay via paypal and add the 4%, Postage will be next day if possible! Glanza Gutted cat with Both Lambda SensorsItem Condition:GoodPrice and price conditions:£35 PostedExtra Info: Good for a decat or for the sensorsPictures: Contact Details:Message on hereLocation:Whitby, North yorkshireN/A Starlet Rear lampsItem Condition:GoodPrice and price conditions:£30 Posted?Extra Info: Lamps have fine cracks in both lenses, happened to all the N/As i have seen locally!Pictures:Contact Details: Message on hereLocation:Whitby, North yorkshireStandard Glanza actuatorItem Condition:GoodPrice and price conditions:£15 postedExtra Info:Good, runs standard boost well and spring feels goodPictures:Contact Details:Message on hereLocation:Whitby, North yorkshireAlso have a WHITELINE RARB For sale if anybody is interested,98Spec glanza front brakes,and a standard manifold that i will put info up shortly! Thanks TT Edited June 15, 2013 by The Toffinator Quote Link to post Share on other sites
The Toffinator Posted May 15, 2012 Author Share Posted May 15, 2012 Bump and PRICE DROPS!! Quote Link to post Share on other sites
dazzariley69 Posted May 15, 2012 Share Posted May 15, 2012 pm me your best price on that wheel and boss kit, outa work times are hard lol. thanks Quote Link to post Share on other sites
The Toffinator Posted May 16, 2012 Author Share Posted May 16, 2012 PM`ed Quote Link to post Share on other sites
ro55ifumi Posted May 16, 2012 Share Posted May 16, 2012 Interested in the top sensor ;)John Quote Link to post Share on other sites
The Toffinator Posted May 16, 2012 Author Share Posted May 16, 2012 i was waiting for you too comment on this^^^ Lol, i will have a think dude, may split the sensors Quote Link to post Share on other sites
theminiguru Posted May 17, 2012 Share Posted May 17, 2012 Pm'd Quote Link to post Share on other sites
The Toffinator Posted May 28, 2012 Author Share Posted May 28, 2012 Wheel sold Quote Link to post Share on other sites
The Toffinator Posted June 5, 2012 Author Share Posted June 5, 2012 Bump and prices dropped Quote Link to post Share on other sites
The Toffinator Posted June 14, 2012 Author Share Posted June 14, 2012 Bump Quote Link to post Share on other sites
The Toffinator Posted May 15, 2013 Author Share Posted May 15, 2013 Bump new parts added Quote Link to post Share on other sites
kbond Posted May 15, 2013 Share Posted May 15, 2013 What sort of hp did you get from the tf035? Quote Link to post Share on other sites
The Toffinator Posted May 15, 2013 Author Share Posted May 15, 2013 I never had the chance to have it dynoed mate, Once i had the actuator etc set up properly it was at full boost 250rpm Later than A CT9, But had a bigger powerband. The only thing that let it down on my car was my Ecu setup. Was comfortably quicker than a 5e Td04 (0.8Bar) Glanza even at silly speeds. The auzzies were getting 240Ish max out of these when i was researching:) Quote Link to post Share on other sites
kbond Posted May 15, 2013 Share Posted May 15, 2013 Am running a td04 at 220hp atm but my oil seals are going so very smokeyWould i be fine to run this at 1bar? And would i see over 200? Quote Link to post Share on other sites
The Toffinator Posted May 15, 2013 Author Share Posted May 15, 2013 Yeh i dont see why you couldnt. I was running a bar and it was spot on! Possibly be a bit rich if its mapped for Td04 though Quote Link to post Share on other sites
kbond Posted May 15, 2013 Share Posted May 15, 2013 i am booked in at tuning developements this sunday as the car is out on fueling so was gonna try and source a turbo before i go but i dont think it would arrive soon enough now Quote Link to post Share on other sites
Craig_N Posted May 15, 2013 Share Posted May 15, 2013 Does the ct9 smoke? Quote Link to post Share on other sites
The Toffinator Posted May 15, 2013 Author Share Posted May 15, 2013 No mate i firstvremoved it for porting and me and micky were very surprised at the condition of it, unusually good. We ported the wastegate, and i had it fitted for about 5 months and it never used a drop of oil. Almost annoyed me as i never had to top the oil up beetween services lol. And Pmed kbond Quote Link to post Share on other sites
The Toffinator Posted May 20, 2013 Author Share Posted May 20, 2013 Bump Quote Link to post Share on other sites
Mike_trx Posted May 21, 2013 Share Posted May 21, 2013 Is the TF035 gone mate? Quote Link to post Share on other sites
The Toffinator Posted May 21, 2013 Author Share Posted May 21, 2013 Hi there mate and yeh its gone Kbond got it sorry Quote Link to post Share on other sites
Mike_trx Posted May 22, 2013 Share Posted May 22, 2013 No problem mate, cheers for the reply! Quote Link to post Share on other sites
dazzi0 Posted May 23, 2013 Share Posted May 23, 2013 wat u got on now then chris Quote Link to post Share on other sites
shizerproject Posted May 29, 2013 Share Posted May 29, 2013 i'll take the CT9 if you still have it Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.