_shaun_ Posted July 16, 2012 Share Posted July 16, 2012 been doing some reading up and it seems abit to simple todo? few people have sujested u just have to remove the abs crap and buy all the none abs parts from a uk spec. has anyone actauly done this and had it working? how much did it cost for all the bits and i dont supose u have a list of all the parts?cheers shaun Quote Link to post Share on other sites
zebedee Posted July 16, 2012 Share Posted July 16, 2012 I've done it wasn't too bad to do, it's easier to do if you take the inlet manifold out the way.I got my parts off Sicaln, you need the front lines, bias valve and the joiners in the bay as they are different. Quote Link to post Share on other sites
_shaun_ Posted July 16, 2012 Author Share Posted July 16, 2012 ahhhh so your simon tryed to get them of sicaln but he said bought them the engine will be out anyway so room isnt an issue. ill need to try find some part numbers and get prices for them cheers! Quote Link to post Share on other sites
zebedee Posted July 16, 2012 Share Posted July 16, 2012 I did have a pic but can't find it i'm sure Sicaln has a copy of it to mate had all the part numbers on. Quote Link to post Share on other sites
_shaun_ Posted July 16, 2012 Author Share Posted July 16, 2012 sweet just droped him a pm i take it its just the hard brake lines u need to change? i have braided hoses for my brake kit so hoping it will be straight fit Quote Link to post Share on other sites
zebedee Posted July 16, 2012 Share Posted July 16, 2012 Yeah it is Shaun, the rear lines to the bias valve in the bay are fine but all the other had lines are different. Your braided hoses will be a straight fit. Quote Link to post Share on other sites
_shaun_ Posted July 16, 2012 Author Share Posted July 16, 2012 perfect! not a great fan of the starlets abs just adds weight and clutter Quote Link to post Share on other sites
zebedee Posted July 16, 2012 Share Posted July 16, 2012 Yeah i found the feel much better i'm on 4 pot willwoods.Bleeding them took a bit of time i ended riging up a pressure bleeder Quote Link to post Share on other sites
_shaun_ Posted July 16, 2012 Author Share Posted July 16, 2012 i have the wms 4 pots which are great but not a fan of the abs feels like i have more control with out it tbh. i hate bleeding brakes so ill need to see who i can invite round to "help" Quote Link to post Share on other sites
Got.boost Posted July 25, 2012 Share Posted July 25, 2012 Thinking about doing this my self is it hard to do ??? Quote Link to post Share on other sites
zebedee Posted July 26, 2012 Share Posted July 26, 2012 No it's not hard easier to get the pies in and out if toy take the inlet manifold only other thing is bleeding the system but thats not too hard just take your time. Quote Link to post Share on other sites
glanzagee Posted July 26, 2012 Share Posted July 26, 2012 I've done it aswell as take out the abs loom have a look at my garage Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.