AlexGTAdv Posted July 23, 2012 Share Posted July 23, 2012 (edited) Item Condition: used, very goodPrice & Conditions: deposit takenItem Description: Here is my engine from my gt that i had built by TM-Developments two years ago. I spent alot of money having it done and it is a great little engine. I did 6 oil changes in the first 1000 miles and ran it in as it should be. Since having the engine out of the car i have had the sump off to re seal it making sure i removed absoloutly all the old sealant. Also i used brand new bolts to put the sump back on. The rocker cover has been painted and a new gasket, nuts and washers have been added. The engine has covered 8000miles give or take and the most boost i ran through it was 1 bar with a toms ecu. The spec is as follows which i have copied from the original reciept from TM:Engine stripped and thoroughly chemically cleaned.Block rebored, crosshatch honed.Forged Wiseco low comp pistons, 74.5/mmScat forged rods.Crank PollishedHead stripped and cleaned, valves re seated, new valve stem sealsNew Head Bolts.New Toyota oil pump,new water pump,new cam belt and tensioner kit,new oil sender switch,new thermostat.All new gaskets and oil seals.Metal head gasket 1.2Ported headRace Spec rocker coverPictures:Location:Tonbridge, KentContact Details:pm me or my number is 07917817258Postage & Packaging / Delivery:Collection or organise your own thing Edited July 28, 2012 by AlexGTAdv Quote Link to post Share on other sites
rob_bower Posted July 23, 2012 Share Posted July 23, 2012 free bump for an old member shame i dont have the money otherwise id have it myselfglws Alex,Rob Quote Link to post Share on other sites
dazzariley69 Posted July 23, 2012 Share Posted July 23, 2012 mine will be going forged and your local, would be perect but money int there atm unfortunatly . i WANT this Quote Link to post Share on other sites
Browner Posted July 23, 2012 Share Posted July 23, 2012 What is the best price shipped to Dublin, Ireland? Quote Link to post Share on other sites
AlexGTAdv Posted July 23, 2012 Author Share Posted July 23, 2012 Cheers rob erm I'll have to get a quote for Ireland mate, I'll get back to ya Quote Link to post Share on other sites
Browner Posted July 24, 2012 Share Posted July 24, 2012 Yeah let me know pal. When I was sending engines to the UK everything was priced on a small pallet and just wrapped the shit out of it in pallet wrap til it was solid. I won't waste your time mate so please get back to me asap Quote Link to post Share on other sites
AlexGTAdv Posted July 24, 2012 Author Share Posted July 24, 2012 Yeah let me know pal. When I was sending engines to the UK everything was priced on a small pallet and just wrapped the shit out of it in pallet wrap til it was solid. I won't waste your time mate so please get back to me asap will do mate Quote Link to post Share on other sites
Hawwy Posted July 24, 2012 Share Posted July 24, 2012 How much power can it take? Quote Link to post Share on other sites
AlexGTAdv Posted July 24, 2012 Author Share Posted July 24, 2012 How much power can it take? that's a hard question but when I had it built tm rated their engines to 400bhp, weather this is true I couldn't say, however with the engine having forged internals I would say with the right setup and someone who knows what they are doing mapping wise you woukd have no problems with silly power like that. Quote Link to post Share on other sites
Hawwy Posted July 24, 2012 Share Posted July 24, 2012 I was just saying because most have arp headbolts too Quote Link to post Share on other sites
joe-ep91 Posted July 24, 2012 Share Posted July 24, 2012 bump for a sweet bullet proof engine with ridiculous potential!!!! Quote Link to post Share on other sites
AlexGTAdv Posted July 25, 2012 Author Share Posted July 25, 2012 I was just saying because most have arp headbolts tooWell that's what tm-developments felt was sufficient and I'm sure they know what they are doing! Quote Link to post Share on other sites
Jamie_VF22 Posted July 25, 2012 Share Posted July 25, 2012 (edited) bump for a sweet bullet proof engine with ridiculous potential!!!!X2 I've got a TMD engine... Amazing engines had mine for a year now and I've had no problems with mine and im near 300bhp..very clean mate well looked after pal free bump Edited July 25, 2012 by Jamie_Td04GT Quote Link to post Share on other sites
AlexGTAdv Posted July 26, 2012 Author Share Posted July 26, 2012 Cheers for that mate deposit taken now, awaiting collection Quote Link to post Share on other sites
Hawwy Posted August 26, 2012 Share Posted August 26, 2012 Did this sell Quote Link to post Share on other sites
dangarbutt Posted August 27, 2012 Share Posted August 27, 2012 yess its sat in my project gt Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.