hazell ep91 sr Posted August 3, 2012 Posted August 3, 2012 Done 4efte conversion all engine and wiring etc is in. Spliced boot loom into glanza dash loom. But went to start it and no fuel getting to fuel rail. Fuel pump cant be working. Any ideas people? Quote
hazell ep91 sr Posted August 3, 2012 Author Posted August 3, 2012 Gunna take interior back out tomorrow and test it. If theres not? Quote
AdamB Posted August 3, 2012 Posted August 3, 2012 Check for 12v at the pump, if not then you could have a break in the wires, poor earth, blown fuse/relay. Quote
starletgt.neal Posted August 4, 2012 Posted August 4, 2012 Apparently you have to change the fuel pump and wiring have you done that dude if so you might have to double check the wiring to make sure Quote
hazell ep91 sr Posted August 4, 2012 Author Posted August 4, 2012 You dont have to change fuel pump. Is there an impact sensor ln glanzas? If so could it not be that? Quote
rob_bower Posted August 4, 2012 Posted August 4, 2012 Is there power to where you spliced it on to? I was thinking imobiliser? Quote
hazell ep91 sr Posted August 4, 2012 Author Posted August 4, 2012 No immobilser on the dash loom i put in mate. I was thinking maybe the impact sensor has gone off or relay gone? Where is fuel pump relay? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.