Glanza-Ben Posted September 12, 2013 Share Posted September 12, 2013 (edited) I've got a 38mm external wastegate and blitz sbc id boost controller and unshore how to fit it as tried one way and the wastegate started making a weird noise and on theNet there's loads of different diagrams so but lostSo wondering how others have gotThere controllers fitted Cheers Edited September 12, 2013 by Glanza-Ben Quote Link to post Share on other sites
AdamB Posted September 12, 2013 Share Posted September 12, 2013 http://www.blitzpowerusa.com/techsupport/pdf/dualsbc_specs-r.pdf Quote Link to post Share on other sites
Glanza-Ben Posted September 13, 2013 Author Share Posted September 13, 2013 Am I ment to put the in pipe into my intercooler pipe then? Quote Link to post Share on other sites
AdamB Posted September 13, 2013 Share Posted September 13, 2013 The solenoid IN is from a pressure source before the throttle body.The solenoid OUTgoes to the top port on the wastegate.Then just use the wastegate manufacture installation to sort the middle/bottom ports on the wastegate. Quote Link to post Share on other sites
Glanza-Ben Posted September 13, 2013 Author Share Posted September 13, 2013 The solenoid IN is from a pressure source before the throttle body.The solenoid OUTgoes to the top port on the wastegate.Then just use the wastegate manufacture installation to sort the middle/bottom ports on the wastegate.I only have a top and bottem port on my wastegate and where's the best pressure source from before the throttle body? I have a turbo smart wastegate and here's there guide http://www.treadstoneperformance.com/prod_imgs/installation/ul/install-112.pdf Quote Link to post Share on other sites
TurboTobz Posted September 13, 2013 Share Posted September 13, 2013 Turn your controller around, check the sliding knob is slid over to 'wg' (wastegate, instead of actuator).Top port to the OUT on the solenoid (the bit in your engine bay with nipples)IN on the solenoid should goto a vac/boost source.Bottom port of turbosmart to the nipple on the side of the turbo Quote Link to post Share on other sites
Glanza-Ben Posted September 13, 2013 Author Share Posted September 13, 2013 Turn your controller around, check the sliding knob is slid over to 'wg' (wastegate, instead of actuator).Top port to the OUT on the solenoid (the bit in your engine bay with nipples)IN on the solenoid should goto a vac/boost source.Bottom port of turbosmart to the nipple on the side of the turboOk willGive that a try and see what happens then Quote Link to post Share on other sites
Glanza-Ben Posted September 13, 2013 Author Share Posted September 13, 2013 (edited) http://i588.photobucket.com/albums/ss321/devoncoupedriver/3ECE0FE5-AF0E-4F78-8AEB-F9F4367DEF48-7058-0000033F7E10C694_zpsa7246a63.mp4http://i588.photobucket.com/albums/ss321/devoncoupedriver/3ECE0FE5-AF0E-4F78-8AEB-F9F4367DEF48-7058-0000033F7E10C694_zpsa7246a63.mp4That's the sound it makes when connected up like the wastegate has a burble rattle noise Edited September 13, 2013 by Glanza-Ben Quote Link to post Share on other sites
Glanza-Ben Posted September 14, 2013 Author Share Posted September 14, 2013 This is really frustrating now as aint doin nothing just making the gurgle noise Quote Link to post Share on other sites
Glanza-Ben Posted September 14, 2013 Author Share Posted September 14, 2013 All working now thanks to this picture I found on google Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.