Vincent-ep91 Posted September 20, 2013 Posted September 20, 2013 Hi, where do people mount the harness for the drivers seat, I have all points located except one down by the handbrake lever. I was going to buy a ZEP mounting bracket from rhd, but they e-mailed me and said they are discontinued.. Please help Quote
roachburger Posted September 20, 2013 Posted September 20, 2013 I mounted mine using an m10 bolt through the hole in the exhaust tunnel where the seatbelt latch attaches Quote
Vincent-ep91 Posted September 20, 2013 Author Posted September 20, 2013 good idea, cut an eye bolt be got so it acts as in eye bolt and bolts the seat rail in place too? Quote
Vincent-ep91 Posted September 21, 2013 Author Posted September 21, 2013 bump.. any one with pictures of how they done this? Quote
mattyD Posted September 22, 2013 Posted September 22, 2013 I have the same problem, turns out there is no eye bolt with the same thread as that one bolt! I managed to fit 3 out of the 4 but just this one will not go! I think the only way is to use a stress plate and go through the exhaust tunnel or cut and weld the thread off the original bolt to your eye holt but that is a bit bodge! Quote
Vincent-ep91 Posted September 22, 2013 Author Posted September 22, 2013 haha.. that is the exact same problem i am having, all other 3 are sorted. Maybe zisco could make us up something? Quote
Vincent-ep91 Posted October 18, 2013 Author Posted October 18, 2013 yes but where did you mount the side ones? Quote
WallaceGlanza Posted October 18, 2013 Posted October 18, 2013 The evo recaros and the likes have a mounting hole for the belt buckle on the seat itself like the stock seats, nice and straightforward. Quote
Vincent-ep91 Posted January 2, 2014 Author Posted January 2, 2014 anyone ever made a bracket similar to the zep ones? Quote
Chris_GlanzaV98 Posted January 2, 2014 Posted January 2, 2014 stick a pic of the zep ones up bud someone may be able to make you one up Quote
Vincent-ep91 Posted January 3, 2014 Author Posted January 3, 2014 (edited) I dont have any pictures as I foolishly didn't save them before rhd took them down. I will make up a solidworks model of one and get a trader to make up something Edited January 3, 2014 by Vincent-ep91 Quote
Vincent-ep91 Posted January 3, 2014 Author Posted January 3, 2014 (edited) TOM`S + RECARO = WIN Back two are fine Edited January 3, 2014 by Vincent-ep91 Quote
mattyD Posted January 3, 2014 Posted January 3, 2014 I will get a picture of mine bud, it's has been bolted to the rear seat mount Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.