Ballyhannon Posted September 29, 2013 Share Posted September 29, 2013 I have fitted a OMP Boss and steering wheel on my ep91 SR. Removed the airbag now problem with horn. I have had a suggestion I use a switch from a non air bag car that would sit under the bass ring at the bottom of the boss. Any ideas folks please if this works does anyone have this part. Quote Link to post Share on other sites
rmsnoel Posted October 3, 2013 Share Posted October 3, 2013 The SR has the 3spoke wheel same as a 98 glanza. The airbag is electric. You need the horn/steering coloumn bit from a manual airbag model, 96-98 Its the bit with the brass pin and spring that sticks out to touch the brass ring on the rear of the boss. Put plenty of grease on the pin and rememver to centre the indictor ring (blackyellow thing) before u fit the wheel or the indictors wont turn off when they should Quote Link to post Share on other sites
rmsnoel Posted October 3, 2013 Share Posted October 3, 2013 You do not neef the steering column, only the brass horn bit 10 probably Quote Link to post Share on other sites
Ballyhannon Posted December 10, 2013 Author Share Posted December 10, 2013 Thanks problem solved used a pin from a nova needed a bit of modification but works through mot now. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.