Glanza Mac Posted October 29, 2013 Share Posted October 29, 2013 (edited) Item For Sale: TD Forged 4E Item Condition & Description: Tuning Developments Stage 3 4EFTE Rebuilt Engine Specs: *Wossner 74.5mm Low Compression Piston Kit with Rings and Pins *Scat 4EFTE Forged Conrod Kit with ARP Rod Bolts *Athena 1.2mm Uprated Metal Headgasket *ARP 2000 Uprated Headbolt Kit inc New Washers *ARP 2000 Uprated Main Stud Kit *Genuine Toyota Full Gasket Kit *Genuine Toyota Oil Pump Kit *OEM Water Pump Kit *OEM Cambelt Kit inc Idler & Tensioner *ACL Main Bearing Kit *ACL Big End Bearing Kit *ACL Thrust Washer Kit *Fully Machined and Polished 4EFTE Bottom End *Fully Stripped and Cleaned 4EFTE Cylinder Head Rebuilt to Custom Tuning Developments Race Spec *Port And Polished Head *TD Low Temperature Thermostat *TD Full ignition overhaul Can Come With A Jam Racing Lightweight Fly Wheel Plus 5000mile old Spec 6 puk Clutch at extra cost 6months/4000 Miles old, 1000 miles was runnning in time and only ever run at wastegate spring pressure which is 0.6 bar Engine is mint, can be heard running and it has never let me down but im now going down a different route Price: SOLD Pictures: ( i dont have any pictures internally of the engine but i do have the invoice from TD, im sure Mike would back me up too ) Payment & Shipping Details: Collection Item For Sale: Rob Barnard Custom One Off Inlet Item Condition & Description: One of Inlet made by Rob Barnard, this was used on Simons engine build and beleive to be used on the great Burwashs car also, Basically its a standard inlet choppped and re welded and tested to be more efficient flow as it doesnt have to curve as much and its less distance travelled but without a big plenum that takes longer to fill. 6 months ago it was fitted to my car and it was pressure tested and welded for an air tight seal and runs beautiful, spool time was shortened by around 250rpm Price: SOLD Pictures: Payment & Shipping Details: Posted or Collection Item For Sale: TD 300 Billet TD04/5 Hybrid Turbo, Wepr Td04/5 Turbo kit Item Condition & Description: (Turbo)Great Condition, No Smoke No Play.. Just Boost , Ran at 0.6 Bar from the day it was fitted, its done 4000 miles and 1000 miles were running in , comes with TD water lines Too (Wepr)Usable condtion, not cracked as it was welded 6 months ago by TD, not the prettiest at the minute but can be tidied up Price: Manifold, Decat and Screamer SOLD! Turbo and wastegate left Pictures: When it was wrapped As it is now Payment & Shipping Details: Delivery or Collection Item For Sale: 550cc Denso injectors Item Condition & Description: Good usable condition, sold to me in working order and have sat in tissue in a plastic sealable bag since Price: SOLD! Pictures: Payment & Shipping Details: Delivery or Collection Item For Sale: HKS F Con Pro ECU Item Condition & Description: Used on Dave Burwashs Car then Simon, Both ran silly power but im changing engines so no need for it now COMES WITH LOOM EP91 & AUTO THROTTLE BODY Price: SOLD Pictures: Payment & Shipping Details: Delivery at your own risk and Collection Item For Sale: Standard LSD Gearbox, Shafts at an extra price Item Condition & Description: Good Condition, no funny noises, used for around 3-4months sinced being put in and its never failed, 2nd does crunch a little but its never bothered me but could just be the oil ive used? or the syncro Price: SOLD Pictures: i have no picture of the gearbox at the minute LSD Shafts Payment & Shipping Details: Delivery or Collection PM for any other information Thanks Rob. Edited November 24, 2013 by Glanza Mac Quote Link to post Share on other sites
Aamir Posted October 29, 2013 Share Posted October 29, 2013 I'm guessing your putting your car back to standard mate? Quote Link to post Share on other sites
Kieran95 Posted October 29, 2013 Share Posted October 29, 2013 Cant belive your doing this :( Quote Link to post Share on other sites
Glanza Mac Posted October 29, 2013 Author Share Posted October 29, 2013 need must :-( Quote Link to post Share on other sites
abbott Posted October 29, 2013 Share Posted October 29, 2013 Interested in inlet mani chap Quote Link to post Share on other sites
Chand Posted October 29, 2013 Share Posted October 29, 2013 What's going on!!! Quote Link to post Share on other sites
Glanza Mac Posted October 29, 2013 Author Share Posted October 29, 2013 pm me :-)gotta do what ya gotta do,also engine needs to sell before i remove anything as its still in use until i get a run aboutRob. Quote Link to post Share on other sites
mattyD Posted October 29, 2013 Share Posted October 29, 2013 Any interior carbon bits mate? Quote Link to post Share on other sites
Phil Posted October 29, 2013 Share Posted October 29, 2013 Interested in inlet mani chap similarly so Phil Quote Link to post Share on other sites
Glanza Mac Posted October 29, 2013 Author Share Posted October 29, 2013 no sorry Matt, only running gear is for sale at the minute and maybe the odd bit here and there but i think they are the last things i would sell haha Rob Quote Link to post Share on other sites
mattyD Posted October 29, 2013 Share Posted October 29, 2013 Lol, I thought as much Shame to see you having to do this though bud Quote Link to post Share on other sites
Glanza Mac Posted October 29, 2013 Author Share Posted October 29, 2013 yeah, it won't be too long before its running again with another engine but i have a few other priorities at the minute :-)Rob Quote Link to post Share on other sites
EP-Azz Posted October 30, 2013 Share Posted October 30, 2013 Would love the engine but how easy would mine sell? Quote Link to post Share on other sites
Glanza Mac Posted October 30, 2013 Author Share Posted October 30, 2013 what you got?Rob Quote Link to post Share on other sites
EP-Azz Posted October 30, 2013 Share Posted October 30, 2013 Standard ain't it so , it's td04'd etc but not sure what's it's worth Quote Link to post Share on other sites
Glanza Mac Posted October 30, 2013 Author Share Posted October 30, 2013 well the engine would sell for 300 min and depends what turbo kit you have Rob Quote Link to post Share on other sites
Glanza Mac Posted October 30, 2013 Author Share Posted October 30, 2013 alot of interest Quote Link to post Share on other sites
glanza87 Posted October 31, 2013 Share Posted October 31, 2013 I've got a load of gear to sell and i cannot post up a new topic. Who do i get in touch with? I've been a member since 08 this makes no sense. Any hoo I've got Volks, bride bucket seats, takata seat belts, blitz ebc, full set of defi gauges and a heap more to sell. Sorry to jump on this topic but i need help and dont know who to contact. Any help will be greatly appreciated! Cheers Regards Johny Quote Link to post Share on other sites
Aamir Posted October 31, 2013 Share Posted October 31, 2013 You need to be a paid member. Like £1.50 a year or something along those lines Quote Link to post Share on other sites
Glanza Mac Posted October 31, 2013 Author Share Posted October 31, 2013 as above , pm me about the bride seats tho ;) Rob. Quote Link to post Share on other sites
Phil Posted October 31, 2013 Share Posted October 31, 2013 (edited) I've got a load of gear to sell and i cannot post up a new topic. Who do i get in touch with? I've been a member since 08 this makes no sense. Any hoo I've got Volks, bride bucket seats, takata seat belts, blitz ebc, full set of defi gauges and a heap more to sell. Sorry to jump on this topic but i need help and dont know who to contact. Any help will be greatly appreciated! Cheers Regards Johny The sites only a year old mate, http://www.ukstarletowners.com/topic/70774-1-year-of-uk-starlet-owners/ Phil Edited October 31, 2013 by Philm Quote Link to post Share on other sites
Glanza Mac Posted October 31, 2013 Author Share Posted October 31, 2013 should be buying a run about tonight so everything will be getting removed ready to be collected or delivered soon :-)Rob Quote Link to post Share on other sites
Glanza Mac Posted November 1, 2013 Author Share Posted November 1, 2013 will accept deposits on bits, big or small Rob. Quote Link to post Share on other sites
Glanza Mac Posted November 2, 2013 Author Share Posted November 2, 2013 weekend bump Quote Link to post Share on other sites
Broony Posted November 2, 2013 Share Posted November 2, 2013 So tempted by this engine, pm me some deets and i'll have a think on it. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.