Sandham Posted November 9, 2013 Share Posted November 9, 2013 Basically ive changed my headlights because a bulb was out i replaced all of them.. Refitted and now my drivers side main and dipped dont work at all. All left lights work and rh sidelight.Also the high beam light in the dash has stopped working? Im going to inspect the wiring behind the quad lights tomorrow but has anyone got any ideas before i strip all the light unit out?Ep82 quadlightThanks Quote Link to post Share on other sites
daniel_g Posted November 9, 2013 Share Posted November 9, 2013 Sounds like an earth issue. There is an earth point near the drivers side light, check that Quote Link to post Share on other sites
Sandham Posted November 9, 2013 Author Share Posted November 9, 2013 Ok will do, do you know roughly where it is? Quote Link to post Share on other sites
daniel_g Posted November 9, 2013 Share Posted November 9, 2013 Might not be the earth reading your post again, but worth a try. Its right in the corner in the bay, where the washer bottle is if you dont have ABS or if you do its still in the same place but its infront of the ABS pump.Easy to see, 10mm bolt through it. Quote Link to post Share on other sites
Sandham Posted November 9, 2013 Author Share Posted November 9, 2013 Ok thanks, ill remove the light tomorrow and check the loom Quote Link to post Share on other sites
Sandham Posted November 10, 2013 Author Share Posted November 10, 2013 Got the lights to come on, however high now is always on with dipped and when i flash high beam it dims both Quote Link to post Share on other sites
Towbar Posted November 10, 2013 Share Posted November 10, 2013 I feel your pain mate, i started mine tonight to warm up to go home and no dipped or high beam,Mines a ep82 quad running HID's on dipped,Just checked all fuses there fine, unplugged it all and replugged it in, still no joy But i have had a smell of burning clutch/brakes inside the cabin, but not outside,Help is much appreciated Sorry to blag your post mate Quote Link to post Share on other sites
Sandham Posted November 11, 2013 Author Share Posted November 11, 2013 got mine going, cleaned the earth and replaced the fuse and touch wood all ok now dont have hids so i wouldnt know about that mate Quote Link to post Share on other sites
Towbar Posted November 11, 2013 Share Posted November 11, 2013 Thats tonight mission, check wires/earths etc, Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.