need some help with wireing want to fit my engine into a jimny 4x4

[boosting24/7]

I've got a forged which I cant sell, and I have a jimny off road truck, and need some good power for tails so I am thinking of running my forged engine in it and my jam ecu, what is the main wireing I need is there a couple leads to wire up or dose the whole dash loom have to go in to?

I've done alot of engine changes , like nova redtops, corsa c20lets, redtop astra vans, escort mk2 with a cosworth engine, rs turbo mk4 vans

So I no abit about wireing lol and makeing things fit,

Any idears please let me no.

I no it would make a load of people laugh.

Edited December 14, 2013 by boosting24/7

[turbo Grant]

Wirings easy, fuel cut relay is boles to the dash around the Clive bod area and the efi relay is in the fues box

Google 4efte wiring looms. Quite a few of them floating about

Edited December 14, 2013 by turbo Grant

[boosting24/7]

Wirings easy, fuel cut relay is boles to the dash around the Clive bod area and the efi relay is in the fues box

Google 4efte wiring looms. Quite a few of them floating about

Thanks mate il have a look on google see what I can see

[boosting24/7]

http://www.toyotagtturbo.com/forums/showthread.php?20491-EP82-EP91-ECU-Pinout-Diagram

Looking at the link, on the ep82 loom.... on connector 2. Would I only have to wire in. Lead 1,2 9 into the jimny switch Live, and then 10 if I wanted a warning light?

Cheers

[turbo Grant]

http://www.toyotagtturbo.com/forums/showthread.php?20491-EP82-EP91-ECU-Pinout-Diagram

Looking at the link, on the ep82 loom.... on connector 2. Would I only have to wire in. Lead 1,2 9 into the jimny switch Live, and then 10 if I wanted a warning light?

Cheers

You need to wire it up via a couple of relays and fueses. Bits not hard at all. On the ignition switch IG2 is 12v with the ignition on, and ST1 is 12v on cranking

This is what I used. Cut all the wiring out of a GT loom