Bussey Posted January 2, 2014 Share Posted January 2, 2014 Thought it would be worth a try, anybody floating about near us that could help out with our Glanza S. We have fitted a 4efte setup out of an ep82. And we have wired it all up to suit the 82 ecu. But we cant get a spark ! We have checked the wires going to the ECU with a multimeter time and time again but still nothing! If anybody near us is a wizard with wiring and could have a quick look it would be very appreciated obviously there would be a drink in it as well ! Cheers guys Quote Link to post Share on other sites
morgey Posted January 2, 2014 Share Posted January 2, 2014 is the ignitor and coil bolted down with a good earth. or was the 82 an auto by any chance? Quote Link to post Share on other sites
Bussey Posted January 2, 2014 Author Share Posted January 2, 2014 is the ignitor and coil bolted down with a good earth. or was the 82 an auto by any chance?Yes there are both bolted down and earthed out from what we can see And no mate, an 82 manual, we have done so much to the car now it's just this little problem holding us up, not happy Quote Link to post Share on other sites
weeman Posted January 5, 2014 Share Posted January 5, 2014 Between the ep82 and ep91 theres 2 pins different on the ecu plug which need moving! Is that the problem? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.