Djaniero Posted March 24, 2014 Share Posted March 24, 2014 Just a quick one guys. I've got an ewg TD04 kit (minus the turbo which I still need),with an 0.8 bar spring at the moment. The member who I bought the kit off was previously running the setup on his car, with just an uprated fuel pump, it made 187bhp and he said fueled perfectly - He had an AEM wideband to keep an eye on things. I'm planning to run 1 bar eventually with my jam fcd and rrfpr, but would I be ok running 0.8 bar safely with just an uprated fuel pump - I don't have a wideband though. Quote Link to post Share on other sites
triple j Posted March 24, 2014 Share Posted March 24, 2014 People have ran it no problem, but I would advise a wideband I wouldn't do it without one Quote Link to post Share on other sites
Djaniero Posted March 24, 2014 Author Share Posted March 24, 2014 Any suggestions on which wide band to go for...also how easy are they to fit? Quote Link to post Share on other sites
brendonware Posted March 24, 2014 Share Posted March 24, 2014 I'm also looking for a wideband but dont really know much about them! Mine was mapped at 2.8bar of fuel pressure running up to 1.1bar on a TD04 but I currently have a map sensor issue so wanted to make sure that the fueling was correct and not cooking my pistons! Brendon Quote Link to post Share on other sites
triple j Posted March 24, 2014 Share Posted March 24, 2014 Am using an aem going strong over 2 years now I can't fault it, u will need to weld a bung on your exhaust Quote Link to post Share on other sites
Djaniero Posted March 24, 2014 Author Share Posted March 24, 2014 I'm also looking for a wideband but dont really know much about them! Mine was mapped at 2.8bar of fuel pressure running up to 1.1bar on a TD04 but I currently have a map sensor issue so wanted to make sure that the fueling was correct and not cooking my pistons! Brendon Was that with an fcd and rrfpr, or with a piggyback or standalone Brendon? Am using an aem going strong over 2 years now I can't fault it, u will need to weld a bung on your exhaust How much is the aem one? Quote Link to post Share on other sites
Liam_D Posted March 24, 2014 Share Posted March 24, 2014 I ran mine at 0.8bar fine with a standard pump and no wide band. Granted it was only for a few months until I could afford management. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.